용어 사전

A

Accelerometer

Accelerometers with integrated charge amplifier electronics (IEPE) are particularly suitable for performing modal analyses.

Analog-to-digital converter (ADC)

The aliasing effect occurs due to a sampling rate that is too low and results in an incorrectly digitized signal.

Assessment of neuromuscular asymmetries by using vertical jump tests

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Axle weighing system / axle load scale

Axle weighing systems designed on the basis of dynamic axle load scales measure the axle loads of vehicles when they drive over the sensors.

B

Big Test Data

What does the term Big Test Data mean? Learn more here…

Bridge protection‎ ‏‏‎

교량 보호는 교량 직전 또는 교량 위에 직접 설치된 주행차량 계측 시스템을 통해 구현할 수 있습니다.

Buffeting test

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

C

캠버각 (camber angle)

Dynamic camber angle is measured relative to ground by means of a precise optical sensor system (DCA) from Kistler.

캐비티 압력

Cavity pressure in the injection molding process

Charge amplifiers

Charge amplifiers vary by measurement type, frequency range, number of measuring channels, measuring range and type of data use.

Cold junction compensation (CJC)

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

절삭력 (Cutting Force)

선삭 작업과 같이 칩이 형성되는 동안 높은 절삭력과 높은 힘과 열이 발생합니다.

선삭 가공 시 절삭력

This graphic illustrates the orthogonal forces during turning, plus the vectoral sum force and the resultant force.

실리더 압력 측정

Cylinder pressure measurement inside the cylinder of a reciprocating piston combustion engine: the basis for cylinder pressure indication.

D

Degrees of protection according to ISO 20653 - Protection agianst water (IP6x)

'Application of cables and sensors with IP68 according to ISO 20653 is mandatory in humid environments or use under water.

차동 측정 기술

A measuring chain as an example of differential measurement technology: the signal to be transmitted is precise and distortion-free.

DTI (Digital Transducer Interface)

DTI is an advanced single-cable technology for the efficient use of complex measurement technology in automotive engineering.

E

연구 및 개발에 있어 측정 데이터 평가/분석

Kistler assists its customers with extensive all-round support and measuring solutions for universal use in demanding vehicle tests.

EN 9100 (AS9100) certification

항공우주 및 항공 테스트를 위한 측정 기술 - Kistler는 가장 까다로운 테스트 시나리오를 위한 맞춤형 솔루션을 제공합니다.

eso GmbH

In March 2021, eso GmbH became Kistler Instrumente GmbH in Tettnang for the sale of speed measurement technology.

F

Filter (electronics)

With a low pass filter all frequencies above the cut-off-frequency are cut off.

플랫 테스트 항공: 중요성, 절차 및 안전

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Force limited vibration testing (FLVT)

For the FLV-test, numerous three-component force sensors are mounted on a base plate that is connected to the slip table.

Force plate

To record complex movement patterns, force plates are used in combination with video cameras or motion-capture systems.

Force sensors - force transducers

Force sensors and force transducers measure dynamic and quasistatic forces in industrial and laboratory applications.

힘-변위-측정

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

G

Ground reaction force (GRF)

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

H

Hexapod system

Exact calibration of a force sensor with the help of a hexapod.

고온 가속도계

고온 가속도계를 사용하면 로켓 엔진의 압력 맥동과 변동을 정밀하게 모니터링할 수 있습니다.

고온 압력 센서

Piezoelectric high-temperature pressure sensors are capable of measuring pressures at temperatures of 700°C (1.300°F) and higher.

Highly insulating cables

The structure of a high-insulating cable consists in multiple layers of different, insulating materials.

I

IEPE (Integrated Electronics Piezo-Electric)

Integrated Electronics Piezo-Electric IEPE

Impact hammer

An impact hammer is a hammer equipped with a piezoelectric force sensor and serves to stimulate a structure that is to be examined.

Impact Testing

[object Object]

J

no entry

K

no entry

L

Load cell

Piezoelectric load cells for measuring the applied force

M

측정 데이터 관리

MaDaM is a measurement data management system that is one component of a complete tool chain covering the entire workflow

측정 불확실성

[object Object]

Measuring cable installation

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

드릴링 작업 시 절삭력 측정

Cutting force measurement during a drilling operation, using a rotating dynamometer (RCD) from Kistler (9170A).

밀링 작업 시 절삭력 측정

Rotating dynamometers (RCD) to measure cutting forces directly on the cutting edge

MEMS accelerometer

Triaxial MEMS accelerometers from Kistler are means of choice for vehicle dynamics, durability and tire NVH testing.

토크 측정 방법

Torque sensors guarantee precise definition of the power and friction values of drives, transmissions and pumps.

모드 해석 (Modal analysis)

벨루가 XL의 기계적 구조에 대한 모달 분석은 괴팅겐에 위치한 DLR에서 광범위한 GVT의 일환으로 수행되었습니다.

Mounting/installing an accelerometer

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Multi-component force sensor

Multi-component force sensors measure dynamic forces and moments acting on aircraft wings in the wind tunnel.

N

NVH (noise, vibration, harshness)

NVH (noise, vibration, harshness) testing

O

Optical combustion analysis

With optical combustion analysis, the performance of engines can be significantly increased.

광학 측정 기술

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Outgassing

Low-outgassing triaxial accelerometer 8763B with a low-outgassing cable from Kistler with TML < 1.00% and CVCM < 0.01%.

P

피에조와 스트레인 게이지

This animation illustrates what are the differences in mechanisms of piezoelectric sensors compared to strain gauge sensors.

압전 효과

석영 결정과 압전 효과

Q

R

S

T

U

no entry

V

W

X

no entry

Y

no entry

Z

no entry

others