용어 사전

A

Accelerometer

Accelerometers with integrated charge amplifier electronics (IEPE) are particularly suitable for performing modal analyses.

Analog-to-digital converter (ADC)

The aliasing effect occurs due to a sampling rate that is too low and results in an incorrectly digitized signal.

Assessment of neuromuscular asymmetries by using vertical jump tests

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Axle weighing system / axle load scale

Axle weighing systems designed on the basis of dynamic axle load scales measure the axle loads of vehicles when they drive over the sensors.

B

Big Test Data

What does the term Big Test Data mean? Learn more here…

Bridge protection‎ ‏‏‎

교량 보호는 교량 직전 또는 교량 위에 직접 설치된 주행차량 계측 시스템을 통해 구현할 수 있습니다.

Buffeting test

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

C

캠버각 (camber angle)

Dynamic camber angle is measured relative to ground by means of a precise optical sensor system (DCA) from Kistler.

캐비티 압력

Cavity pressure in the injection molding process

Charge amplifiers

Charge amplifiers vary by measurement type, frequency range, number of measuring channels, measuring range and type of data use.

Cold junction compensation (CJC)

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

절삭력 (Cutting Force)

선삭 작업과 같이 칩이 형성되는 동안 높은 절삭력과 높은 힘과 열이 발생합니다.

선삭 가공 시 절삭력

This graphic illustrates the orthogonal forces during turning, plus the vectoral sum force and the resultant force.

실리더 압력 측정

Cylinder pressure measurement inside the cylinder of a reciprocating piston combustion engine: the basis for cylinder pressure indication.

D

Degrees of protection according to ISO 20653 - Protection agianst water (IP6x)

'Application of cables and sensors with IP68 according to ISO 20653 is mandatory in humid environments or use under water.

차동 측정 기술

A measuring chain as an example of differential measurement technology: the signal to be transmitted is precise and distortion-free.

DTI (Digital Transducer Interface)

DTI is an advanced single-cable technology for the efficient use of complex measurement technology in automotive engineering.

E

연구 및 개발에 있어 측정 데이터 평가/분석

Kistler assists its customers with extensive all-round support and measuring solutions for universal use in demanding vehicle tests.

EN 9100 (AS9100) certification

항공우주 및 항공 테스트를 위한 측정 기술 - Kistler는 가장 까다로운 테스트 시나리오를 위한 맞춤형 솔루션을 제공합니다.

eso GmbH

In March 2021, eso GmbH became Kistler Instrumente GmbH in Tettnang for the sale of speed measurement technology.

F

Filter (electronics)

With a low pass filter all frequencies above the cut-off-frequency are cut off.

플랫 테스트 항공: 중요성, 절차 및 안전

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Force limited vibration testing (FLVT)

For the FLV-test, numerous three-component force sensors are mounted on a base plate that is connected to the slip table.

Force plate

To record complex movement patterns, force plates are used in combination with video cameras or motion-capture systems.

Force sensors - force transducers

Force sensors and force transducers measure dynamic and quasistatic forces in industrial and laboratory applications.

힘-변위-측정

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

G

Ground reaction force (GRF)

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

H

Hexapod system

Exact calibration of a force sensor with the help of a hexapod.

고온 가속도계

고온 가속도계를 사용하면 로켓 엔진의 압력 맥동과 변동을 정밀하게 모니터링할 수 있습니다.

고온 압력 센서

Piezoelectric high-temperature pressure sensors are capable of measuring pressures at temperatures of 700°C (1.300°F) and higher.

Highly insulating cables

The structure of a high-insulating cable consists in multiple layers of different, insulating materials.

I

IEPE (Integrated Electronics Piezo-Electric)

Integrated Electronics Piezo-Electric IEPE

Impact hammer

An impact hammer is a hammer equipped with a piezoelectric force sensor and serves to stimulate a structure that is to be examined.

Impact Testing

[object Object]

J

no entry

K

no entry

L

Load cell

Piezoelectric load cells for measuring the applied force

M

측정 데이터 관리

MaDaM is a measurement data management system that is one component of a complete tool chain covering the entire workflow

측정 불확실성

[object Object]

Measuring cable installation

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

드릴링 작업 시 절삭력 측정

Cutting force measurement during a drilling operation, using a rotating dynamometer (RCD) from Kistler (9170A).

밀링 작업 시 절삭력 측정

Rotating dynamometers (RCD) to measure cutting forces directly on the cutting edge

MEMS accelerometer

Triaxial MEMS accelerometers from Kistler are means of choice for vehicle dynamics, durability and tire NVH testing.

토크 측정 방법

Torque sensors guarantee precise definition of the power and friction values of drives, transmissions and pumps.

모드 해석 (Modal analysis)

벨루가 XL의 기계적 구조에 대한 모달 분석은 괴팅겐에 위치한 DLR에서 광범위한 GVT의 일환으로 수행되었습니다.

Mounting/installing an accelerometer

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Multi-component force sensor

Multi-component force sensors measure dynamic forces and moments acting on aircraft wings in the wind tunnel.

N

NVH (noise, vibration, harshness)

NVH (noise, vibration, harshness) testing

O

Optical combustion analysis

With optical combustion analysis, the performance of engines can be significantly increased.

광학 측정 기술

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Outgassing

Low-outgassing triaxial accelerometer 8763B with a low-outgassing cable from Kistler with TML < 1.00% and CVCM < 0.01%.

P

피에조와 스트레인 게이지

This animation illustrates what are the differences in mechanisms of piezoelectric sensors compared to strain gauge sensors.

압전 효과

석영 결정과 압전 효과

압전형 하중계 (Piezoelectric force sensor)

압전력 센서는 압축력 및 인장력을 정밀하게 측정하도록 설계되었습니다.

압전형 압력 센서 (piezoelectric pressure sensor)

The illustration of a piezoelectric pressure sensor shows how the pressure is transformed to a proportional electric charge.

압전형 압력 센서: 전하(PE) vs. 전압(IEPE) 출력

The list outlines when to apply piezoelectric pressure sensors with charge (PE) or with voltage output (IEPE).

정압 측정을 위한 전하 출력(PE) 타입 압전형 압력 센서

Piezoelectric pressure sensors with charge output (PE) display a drift during static pressure measurement.

동압 측정을 위한 압전형 센서

Graph shows how piezoelectric sensors perform during long-term dynamic pressure measurement of smallest pressure pulsations.

압저항 효과

Silicon chip with four resistors; pressure distribution on a silicon semiconductor.

압전 저항형 압력 센서 (piezoresistive pressure sensor)

Piezoresistive pressure sensor based on silicon chip: a silicon chip senses the pressure via a membrane and silicone oil.

PiezoStar 결정

PiezoStar crystals: they are used in sensors for measuring smallest forces and perform measurements at higher temperatures.

동력전달장치

A powertrain is a complex system consisting of various components that are optimized and coordinated with one another using measurement technology.

압력 센서 보정

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Q

Quasi-static vs dynamic measurement type

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

R

Range Capacitor

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Road safety

Traffic monitoring systems help increase road safety through selective or continuous monitoring.

S

Sampling rate and aliasing effect

The aliasing effect occurs due to a sampling rate that is too low and results in an incorrectly digitized signal.

Sensor calibration

In the accredited calibration laboratory: a precision calibrator is used to calibrate a charge amplifier.

서보 프레스 (Servo press)

Servo presses in operation: thanks to their high energy efficiency, these electromechanical joining systems help to protect the climate.

Signal conditioning

'Charge amplifiers like the Kistler LabAmp enable signal conditioning for piezoelectric sensors.

Signal processing

'Data acquisition systems and analysis software like KiDAQ and jBEAM from Kistler offer many options for signal processing.

스트레인 게이지: 기능, 적용 및 장점

Strain gauges: the electrical resistance changes proportionally to the strain exerted on it when stretched or compressed.

Strain gauge force sensors

Strain gauge force sensors measure applied static and quasistatic tensile and compression forces.

T

TEDS - Transducer Electronic Data Sheet

'Sensors with integrated TEDS (Transducer Electronic Data Sheet) facilitate signal conditioning combined with DAQ systems.

Testing electric motors

Test benches for electric motors are used in research and development, for quality assurance, auditing and in production.

Time Constant

The article explains the effect of the time constant on the measurement signal in quasi-static or dynamic measurements. (119)

Time Constant Resistor

The graphic displays shows the time constant resistor integrated into the circuit diagram of a charge amplifier.

Traffic monitoring system

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Triboelectric effect

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

U

no entry

V

Vester Electronics GmbH

The former Vester Elektronik GmbH was renamed Kistler Straubenhardt in 2020.

W

휠 포스 트랜스듀서 (Wheel force transducer)

Custom-made wheel force transducers for performing load measurements to support vehicle development.

휠 토크 트랜스듀서 (Wheel torque transducer)

Application of wheel torque transducers during an air drag measurement on a heavy truck equipped with measurement technology.

WIM

Weigh In Motion (WIM) System: Quartz sensor installed on the level of the pavement surface

X

no entry

Y

no entry

Z

no entry

others

3D force plate

3D force plates for movement analysis in sports help to improve the performance of athletes and to avoid injuries.