Produkty do monitorowania i sterowania wtryskiwaniem tworzyw

Advanced injection molding production with Kistler sensors and systems

Niezawodne i precyzyjne czujniki stanowią podstawę efektywnego monitorowania procesów we wtryskiwaniu tworzyw. Pomiar w miejscu, gdzie odbywa się proces, jest kluczem do przejrzystego wykrywania stanu procesu.

These strain sensors are suitable for measuring dynamic and quasistatic forces on fixed or moving machine parts. The sensor measures the force-proportional strain on machine or structural surfaces.

Piezoelectric surface strain sensors, highly sensitive (-600 … 600 με)

Piezoelectric surface strain sensors, highly sensitive (-600 … 600 με)

Piezoelectric surface strain sensor, highly sensitive (-600 … 600 με)

Zaloguj się do myKistler aby zobaczyć ceny

Piezoelectric surface strain transducer, highly sensitive, isolated ground (±600 µɛ)

These transmitters with an integrated fully-digital charge amplifier are particularly suitable for measuring dynamic and quasistatic forces on stationary or moving machine parts.

Piezoelectric surface strain sensors, transmitters with integrated charge amplifier, ±20 … ±800 με

Piezoelectric surface strain sensors, transmitters with integrated charge amplifier, ±20 … ±800 με

Piezoelectric surface strain sensor, transmitter with integrated charge amplifier (±20 … ±800 με)

Zaloguj się do myKistler aby zobaczyć ceny

Piezoelectric sensor for monitoring cavity and injection pressures, e.g. in injection molding. This longitudinally sensitive pin is used for indirect measurement of dynamic pressures and strains.

Piezoelectric sensors, longitudinal strain measuring pins (M5)

Piezoelectric sensors, longitudinal strain measuring pins (M5)

Piezoelectric sensor, longitudinal strain measuring pin (M5) for cavity and injection pressure

Zaloguj się do myKistler aby zobaczyć ceny

Cavity pressure sensor, contact-free measuring, M5, with single-wire cable (length 1.5 m) and connector Type 1839

Zaloguj się do myKistler aby zobaczyć ceny

These quartz force sensors are suitable for measuring indirect cavity pressure behind an ejector pin during the injection molding of plastics.

Cavity pressure sensors, indirect measuring (ø12.6 mm, 10 kN, 200°C)

Cavity pressure sensors, indirect measuring (ø12.6 mm, 10 kN, 200°C)

Cavity pressure sensor, indirect measuring (ø12.6 mm, 10 kN, 200°C, without cable)

Zaloguj się do myKistler aby zobaczyć ceny

Cavity pressure sensor, indirect measuring (ø12.6 mm, 10 kN, 200°C, 0.8 m coaxial cable)

Zaloguj się do myKistler aby zobaczyć ceny

These smallest quartz force sensors are suitable for indrect measuring of cavity pressure behind an ejector or measuring pin during the injection molding of plastics.

Cavity pressure sensors, indirect measuring (ø3.5 mm, 250 N, 200°C)

Cavity pressure sensors, indirect measuring (ø3.5 mm, 250 N, 200°C)

Cavity pressure sensor, indirect measuring, with connector (ø3.5 mm, 250 N, 200°C, single-wire cable length 1.5 m)

Zaloguj się do myKistler aby zobaczyć ceny

Cavity pressure sensor, indirect measuring, no connector (ø3.5 mm, 250 N, 200°C, single-wire cable length 1.5 m)

Zaloguj się do myKistler aby zobaczyć ceny

These quartz force sensors are suitable for measuring indirect cavity pressure behind an ejector pin during the injection molding of plastics.

Cavity pressure sensors, indirect measuring (ø6 mm, 2.5 kN, 200°C)

Cavity pressure sensors, indirect measuring (ø6 mm, 2.5 kN, 200°C)

Cavity pressure sensor, indirect measuring (ø6 mm, 2.5 kN, 200 °C), 1.5 m single-wire cable, without connector

Zaloguj się do myKistler aby zobaczyć ceny

Cavity pressure sensor, indirect measuring (ø6 mm, 2.5 kN, 200 °C), 0.6 m coaxial cable

Zaloguj się do myKistler aby zobaczyć ceny

These quartz force sensors are suitable for measuring indirect cavity pressure behind an ejector pin during the injection molding of plastics.

Cavity pressure sensors, indirect measuring (ø6 mm, 2.5 kN, 200°C), with M2.5 mounting thread

Cavity pressure sensors, indirect measuring (ø6 mm, 2.5 kN, 200°C), with M2.5 mounting thread

Cavity pressure sensor, indirect measuring (ø6 mm, 2.5 kN, 200°C), M2.5 mounting thread, without cable

Zaloguj się do myKistler aby zobaczyć ceny

Cavity pressure sensor, indirect measuring (ø6 mm, 2.5 kN, 200°C), M2.5 mounting thread and connector

Zaloguj się do myKistler aby zobaczyć ceny

These quartz measuring tongues are suitable for measuring mold cavity pressure. The sensors can be mounted behind a measuring or ejector pin during the injection molding of plastics.

Cavity pressure sensors, indirect measuring (ø12.6 mm, 10 kN, 200°C)

Cavity pressure sensors, indirect measuring (ø12.6 mm, 10 kN, 200°C)

Cavity pressure sensor, indirect measuring (ø12.6 mm, 10 kN, 200 °C), no cable

Zaloguj się do myKistler aby zobaczyć ceny

Cavity pressure sensor, indirect measuring (ø12.6 mm, 10 kN, 200 °C), coaxial cable 0.2 m

Zaloguj się do myKistler aby zobaczyć ceny

These quartz measuring tongues are suitable for measuring mold cavity pressure. The sensors can be mounted behind a measuring or ejector pin during the injection molding of plastics.

Cavity pressure sensors, indirect measuring (ø6 mm, 2.5 kN, 150°C)

Cavity pressure sensors, indirect measuring (ø6 mm, 2.5 kN, 150°C)

Cavity pressure sensor, indirect measuring (ø6 mm, 2.5 kN, 150 °C), no cable

Zaloguj się do myKistler aby zobaczyć ceny

Cavity pressure sensor, indirect measuring (ø6 mm, 2.5 kN, 150 °C), coaxial cable 0.2 m

Zaloguj się do myKistler aby zobaczyć ceny

The battery-powered test device measures the sensitivity of installed cavity pressure sensors, the functionality of temperature sensors, and the insulation resistance of sensors cables. It can also be used to check the measuring chain by charge generation.

Sensor testers for cavity pressure and temperature sensors

Sensor testers for cavity pressure and temperature sensors

Sensor tester for cavity pressure and temperature sensors, complete set

Zaloguj się do myKistler aby zobaczyć ceny

Sensor tester for cavity pressure and temperature sensors, handheld only

Zaloguj się do myKistler aby zobaczyć ceny

Process monitoring and control system ComoNeo for injection molding / 5887A

Process monitoring and control system ComoNeo for injection molding, up to 32 cavity pressure and up to 16 temperature sensors

Process monitoring and control system ComoNeo for injection molding, up to 32 cavity pressure and up to 16 temperature sensors

Process monitoring and control system ComoNeo for injection molding, 8 cavity pressure sensors, 2 x 4-channel and 8 temperature sensors

Zaloguj się do myKistler aby zobaczyć ceny

Process monitoring and control system ComoNeo for injection molding, 8 cavity pressure sensors, 1 x 8-channel and 8 temperature sensors

Zaloguj się do myKistler aby zobaczyć ceny

The ComoNeo and ComoScout process monitoring and control systems can be controlled via an optional 15.6" capacitive touch display.

Touch display for ComoNeo and ComoScout process monitoring system

Touch display for ComoNeo and ComoScout process monitoring system

Touch display for ComoNeo and ComoScout process monitoring system

Zaloguj się do myKistler aby zobaczyć ceny