Akcesoria

Zestawy do wstępnego obciążenia czujników siły, spray'e czyszczące i inne akcesoria do skutecznego stosowania technologii pomiarowej.

These force distributing caps are made to fit several strain sensors with various measuring ranges

Force distributing caps for strain sensors

Force distributing caps for strain sensors

Force distributing cap for strain gauge force sensors of Type 4578A, Fz max from 0.2 kN to 10 kN

Zaloguj się do myKistler aby zobaczyć ceny

Force distributing cap for strain gauge force sensors of Type 4579A (Fz max from 20 kN to 50 kN)

Zaloguj się do myKistler aby zobaczyć ceny

These standardized pretensioning elements consist of high strength stainless steel bolts, which forms are optimized for a minimized force shunt and very high preloads.

Preloading sets for triaxial and big force sensors (90x7C, 90x8C, 9081, 9091)

Preloading sets for triaxial and big force sensors (90x7C, 90x8C, 9081, 9091)

Preloading set for triaxial force sensors of Types 9027C, 9028C and 9026C4

Zaloguj się do myKistler aby zobaczyć ceny

Preloading set for triaxial force sensors of Types 9067C, 9068C and 9066C4

Zaloguj się do myKistler aby zobaczyć ceny

These standardized pretensioning elements are used for mounting piezoelectric ring force transducers of Type 90x1C and 910xC.

Preloading sets for piezoelectric force sensors of Type 90x1C and 910xC for high loads

Preloading sets for piezoelectric force sensors of Type 90x1C and 910xC for high loads

High quality preloading set for piezoelectric force sensors of Types 9021C and 9102C

Zaloguj się do myKistler aby zobaczyć ceny

High quality preloading set for piezoelectric force sensors of Types 9031C and 9103C

Zaloguj się do myKistler aby zobaczyć ceny

Standardized pretensioning bolts Type 9022Ax1 for the installation of piezoelectric force transducers of sensor families 90x1C and 910xC.

Preloading bolts for piezoelectric force sensors Types 90x1C and 910xC

Preloading bolts for piezoelectric force sensors Types 90x1C and 910xC

Preloading set for piezoelectric force sensors of Type 9001C

Zaloguj się do myKistler aby zobaczyć ceny

Preloading set for piezoelectric force sensors of Types 9011C and 9101C

Zaloguj się do myKistler aby zobaczyć ceny

This is a standardized mounting accessory for SlimLine sensors. With each preloading disk a fitting countersunk screw is supplied.

Preloading disks for SlimLine sensors of Type 913xC and 914xC

Preloading disks for SlimLine sensors of Type 913xC and 914xC

Pretensioning disk for SlimLine sensors Type 9130C with M2 screw

Zaloguj się do myKistler aby zobaczyć ceny

Pretensioning disk for SlimLine sensors Type 9132C with M2.5 screw

Zaloguj się do myKistler aby zobaczyć ceny

The force to be measured must be distributed evenly on the contact surface of the piezoelectric load cell. A force distributing cap ensures an ideal distribution, if a concentrated application of force cannot be avoided.

Force distributing caps for piezoelectrical load cells of Types 9313AAX and 93X1C

Force distributing caps for piezoelectrical load cells of Types 9313AAX and 93X1C

Force distributing cap for piezoelectrical load cell of Type 9313AA1

Zaloguj się do myKistler aby zobaczyć ceny

Force distributing cap for piezoelectrical load cell of Type 9313AA2

Zaloguj się do myKistler aby zobaczyć ceny

The force to be measured must be distributed evenly on the contact surface of the piezoelectric load cell. A force distributing cap ensures an ideal distribution, if a concentrated application of force cannot be avoided

Force distributing caps for piezoelectrical load cells of Type 93X3A

Force distributing caps for piezoelectrical load cells of Type 93X3A

Force distributing cap for piezoelectrical load cells of Type 9333A

Zaloguj się do myKistler aby zobaczyć ceny

Force distributing cap for piezoelectrical load cells of Types 9323A, 9323AA and 9323AAA

Zaloguj się do myKistler aby zobaczyć ceny

Force distribution caps for piezoelectric load cells Type 917xC

Force distribution caps for piezoelectric load cells Type 917xC

Force distributing cap for piezoelectric load cell of SlimLine Type 9173C

Zaloguj się do myKistler aby zobaczyć ceny

Force distributing cap for piezoelectric load cell of SlimLine Type 9174C

Zaloguj się do myKistler aby zobaczyć ceny

The force to be measured must be distributed evenly on the contact surface of the piezoelectric load cell. A force distributing cap ensures an ideal distribution, if a concentrated application of force cannot be avoided.

Force distributing caps for piezoelectric force sensors of Types 90x1C and 910xC

Force distributing caps for piezoelectric force sensors of Types 90x1C and 910xC

Force distributing cap for piezoelectric force sensors of Type 9001C

Zaloguj się do myKistler aby zobaczyć ceny

Force distributing cap for piezoelectric force sensors of Types 9011C and 9101C

Zaloguj się do myKistler aby zobaczyć ceny

The contact surfaces have to be just as flat and stiff as the contact surfaces of the load cell itself. If they cannot be finished, local overstressing and damage to the force sensor's surface have to be prevented by using a force distributing ring.

Force distributing rings for piezoelectric force sensors of Types 90x1C and 910xC

Force distributing rings for piezoelectric force sensors of Types 90x1C and 910xC

Force distributing ring for piezoelectric force sensors of Type 9001C

Zaloguj się do myKistler aby zobaczyć ceny

Force distributing ring for piezoelectric force sensors of Types 9011C and 9101C

Zaloguj się do myKistler aby zobaczyć ceny

Standardized mounting flanges provide an optimum force introduction on the piezoelectrical load cell. These components are manufactured as precision parts and have a surface hardness between 400 and 490 HV (Vickers).

Mounting flanges for piezoelectrical load cells of Types 9313AAX and 93X3A

Mounting flanges for piezoelectrical load cells of Types 9313AAX and 93X3A

Mounting flange for piezoelectrical load cells of Type 9333A

Zaloguj się do myKistler aby zobaczyć ceny

Mounting flange for piezoelectrical load cells of Type 9343A

Zaloguj się do myKistler aby zobaczyć ceny

Flanges for optimum force introduction.

Flanges for optimum force introduction, for piezoelectric load cells Type 93x1C

Flanges for optimum force introduction, for piezoelectric load cells Type 93x1C

Flange for optimum force introduction, for piezoelectric load cell Type 9301C

Zaloguj się do myKistler aby zobaczyć ceny

Flange for optimum force introduction, for piezoelectric load cell Type 9311C

Zaloguj się do myKistler aby zobaczyć ceny