홈/제품/센서/힘 센서/캐비티 압력 센서, 간접 측정 (ø6 mm, 2.5 kN, 200°C)/9211BG

캐비티 압력 센서, 간접 측정 (ø6 mm, 2.5 kN, 200 °C), 1.5 m 단일 와이어 케이블, 커넥터 없음 / 9211BG

캐비티 압력 센서, 간접 측정 (ø6 mm, 2.5 kN, 200 °C), 1.5 m 단일 와이어 케이블, 커넥터 없음
9211BG
18007430
  • 캐비티 압력 센서, 간접 측정
  • 최대 3000bar의 캐비티 압력용
  • 단일 와이어 케이블 1.5m, 커넥터 없음
요청 시
요청 시
Measuring ranges
Minimum measuring range [kN]
0 kN
Maximum measuring range [kN]
2.5 kN
Product type
Measurement system
Sensor
Force sensor type
A dynamometer is a force plate measuring forces and moments.
Single axis force sensor
Pressure sensor type
Indirect cavity pressure sensor
Preloaded sensor
Preloaded sensors are already calibrated and therefore ready-to-use. Non-preloaded sensors are smaller.
No
Mechanical properties
Overload
3000 N
Metrological characteristics
Linearity
Linearity represents the maximum deviation/error between ideal and actual output signal characteristics in relation to the measurand in a specific measuring range. It is expressed in percentage of the range of measurement signal (Full Scale Output).
≤±1 %FSO
Threshold
10 mN
Electrical properties
Output signal type
Charge (Piezoelectric, PE)
Minimal insulation resistance
10^12 Ω (120 °C), 10^13 Ω
Influence quantities
Sensitivity
-4.4 pC/N
Certificates and Standards
Degree of protection EN 60529
IP65
Operation and installation
Operating temperature range
-40 … 200 °C
Applications
Monitoring and control in injection molding
Cable properties
Cable included
Yes - fixed cable
Interfaces
Connector type
Open end
Dimensions and materials
Predefined cable length
1.5 m
9211B형 석영 힘 센서는 플라스틱 사출 성형 과정에서 이젝터 핀 뒤의 간접 캐비티 압력을 측정하는 데 적합합니다.
로딩 중
로딩 중