Loop control, sag control, 8 or 16 channels, analog output 0 ... 10 VDC, operating range 50 ... 400 mm / DHS

The loop control with 8 or 16 infrared light beams detects thin and fast-moving materials when winding and unwinding endless strips.

DHS

The loop control with 8 or 16 infrared light beams detects thin and fast-moving materials when winding and unwinding endless strips.
主な特長/メリット
  • 8 or 16 separately programmable through-beam sensors
  • Operating range between 50 ... 400 mm
  • Sensor resolution: >0.2 mm Strip thickness
  • Analog output voltage: 0 ... 10 VDC
  • Winding or unwinding mode switchable
  • Additional switching output for e.g. strip tightening or strip end
  • Connection: plug M12, 5-pin
The DHS non-contact loop control for detecting thin materials when winding and unwinding endless strips. With the loop control, stamped strips with a thickness of 0.2 mm or more can be wound or unwound from a reel evenly and without jerks, and thus also without tension and stress. The loop control regulates the drive of the winder in such a way that continuous and vibration-free operation is ensured as a function of the decreasing or increasing diameter of the coils. Eight or 16 infrared light beams are arranged horizontally as through-beam sensors in such a way that only one light beam at a time passes through the material loop of the strip. Trembling movements of the belt do not influence the function. Each light beam can be assigned an output value between 0 and 10 VDC by programming adapter, which is provided at the output as a setpoint for the drive (frequency converter) until another light beam is passed by the belt loop. This ensures continuous operation of the winder drive.
データシート
英語
pdf
ここをクリックして myKistler にログインしてください。リダイレクトされます。
製品カタログ
英語
pdf
ここをクリックして myKistler にログインしてください。リダイレクトされます。