Home/製品紹介/センサ/力センサ/Cavity pressure sensors, indirect measuring (ø6 mm, 2.5 kN, 200°C), with M2.5 mounting thread/9213B0,0

キャビティ圧力センサ、間接測定（φ6 mm、2.5 kN、200°C）、M2.5取り付けネジ、ケーブルなし / 9213B0,0

キャビティ圧力センサ、間接測定（φ6 mm、2.5 kN、200°C）、M2.5取り付けネジ、ケーブルなし
9213B0,0
18007438
  • 非常にコンパクトなキャビティ圧力センサー
  • 3000barまでのキャビティ圧力に対応
  • シングルワイヤー・テクノロジー
  • M2.5ネジ
ご要望に応じて
ご要望に応じて
Measuring ranges
Minimum measuring range [kN]
0 kN
Maximum measuring range [kN]
2.5 kN
Product type
Measurement system
Sensor
Force sensor type
A dynamometer is a force plate measuring forces and moments.
Single axis force sensor
Pressure sensor type
Indirect cavity pressure sensor
Preloaded sensor
Preloaded sensors are already calibrated and therefore ready-to-use. Non-preloaded sensors are smaller.
No
Mechanical properties
Overload
3000 N
Metrological characteristics
Linearity
Linearity represents the maximum deviation/error between ideal and actual output signal characteristics in relation to the measurand in a specific measuring range. It is expressed in percentage of the range of measurement signal (Full Scale Output).
≤±1 %FSO
Threshold
10 mN
Electrical properties
Output signal type
Charge (Piezoelectric, PE)
Minimal insulation resistance
10^12 Ω (120 °C), 10^13 Ω
Influence quantities
Sensitivity
-4.4 pC/N
Certificates and Standards
Degree of protection EN 60529
IP65
Operation and installation
Operating temperature range
-40 … 200 °C
Applications
Monitoring and control in injection molding
Interfaces
Connector type
Fischer 102 Triax neg.
9213B型水晶フォースセンサは、プラスチック射出成形時のエジェクタピン背後の間接的なキャビティ圧の測定に適しています。
読込み中
読込み中