Home/製品紹介/センサ/力センサ/Cavity pressure sensors, indirect measuring (ø3.5 mm, 250 N, 200°C)/9210AAE

キャビティ圧力センサ、間接測定、コネクタ付き（ø3.5 mm、250 N、200°C、単線ケーブル長1.5 m） / 9210AAE

キャビティ圧力センサ、間接測定、コネクタ付き（ø3.5 mm、250 N、200°C、単線ケーブル長1.5 m）
9210AAE
18007421
  • 金型インサートへの取り付けに最適な小型サイズのキャビティ圧力センサ
  • 測定範囲：0 ～0.25 kN
  • マルチキャビティアプリケーションに最適
  • 一体型単線ケーブル
ご要望に応じて
ご要望に応じて
Measuring ranges
Minimum measuring range [kN]
0 kN
Maximum measuring range [kN]
0.25 kN
Product type
Measurement system
Sensor
Force sensor type
A dynamometer is a force plate measuring forces and moments.
Single axis force sensor
Pressure sensor type
Indirect cavity pressure sensor
Preloaded sensor
Preloaded sensors are already calibrated and therefore ready-to-use. Non-preloaded sensors are smaller.
No
Mechanical properties
Overload
300 N
Metrological characteristics
Linearity
Linearity represents the maximum deviation/error between ideal and actual output signal characteristics in relation to the measurand in a specific measuring range. It is expressed in percentage of the range of measurement signal (Full Scale Output).
≤±1 %FSO
Electrical properties
Output signal type
Charge (Piezoelectric, PE)
Minimal insulation resistance
10^12 Ω (120 °C), 10^13 Ω
Influence quantities
Sensitivity
–11 pC/N
Certificates and Standards
Degree of protection EN 60529
IP65
Operation and installation
Operating temperature range
0 … 200 °C
Applications
Monitoring and control in injection molding
Cable properties
Cable included
Yes - fixed cable
Interfaces
Connector type
Fischer 102 Triax neg.
9210AAE型は、プラスチックの射出成形時にエジェクタや測定ピンの背後のキャビティ圧力を間接測定するための小型力センサです。
読込み中
読込み中