/Products/Connettività e accessori/Cavi/Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos./1641BSP

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., length 0.1 to 50 m / 1641BSP

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., length 0.1 to 50 m
1641BSP
18000557
  • Length: custom (0.1 to 50 m)
  • Temperature range: –55 to +200°C
  • Sensor connection: KIAG 10-32 pos. 90° (IP65)
  • Amplifier connector: BNC pos. (IP40)
 
 
 
Configurable cable length0.1 … 50 mDegree of protection EN 60529IP65, IP40
ConnectionsKIAG 10-32 pos., 90°, BNC pos.
Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. connector. Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1013 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.