Piezoelectric load cell, force transducer (Fz ±24 kN / ±5.4 klbf) / 9331C
- Piezoelectric force transducer with a measuring range of Fz: –24 ... +24 kN
- Dimensions DxH: 29x52 mm
- Female screw thread: M12x1.75
- Connector: KIAG 10-32 neg.
Preloaded sensorYesMeasuring range-24 … 24 kNMaximum measuring range24 kNForce sensor typeStandard force sensorCalibrated range 10 … 24 kNCalibrated range 20 … 0.24 kNCalibrated range 30 … -24 kNMaximum force±26.4 kNNominal force±24 kNMaximum bending moment (Fz=0)104 NmTemperature sensitivity, sensitivity change (-40°C … 120°C, Tref = 25°C)±1.5 %Natural frequency (free-free) f0fz36.9 kHzAxial stiffness1150 kN/μmBending stiffness0.865 kNm/°Lateral stiffness0.048 kN/μmCalculated shear stiffness0.13 kN/μmCalculated torsonial stiffness0.633 kNm/°Sensor capacitance52±5 pFGround insulation resistance≥100 MΩInsulation resistance at 23 °C≥10^13 ΩSensitivity–3.9±0.3 pC/NOperating temperature range-40 … 120 °CLinearity±0.5 %FSOOutput signal typeCharge (Piezoelectric, PE)Weight170 gApplicationsIn- and End-of-Line Testing for Production processes
A piezoelectric load cell, also known as force transducer or force link, measures dynamic or quasistatic forces, both tensile and compression. This load cells contains a piezoelectric ring force transducer of the 90x1C sensor family which is preloaded and calibrated, thus ready to use immediately. Sensors in the 93x1C load cell family are the easiest way to measure forces piezoelectrically without the need for sophisticated installation and calibration. These force transducers are factory calibrated and preloaded to measure both tension and compression forces. The load cell is ready to measure within minutes and provide accurate data from dynamic or quasistatic processes. In addition, these force transducers have been installed in an electrically isolated manner, so that ground loops are largely eliminated.
Piezoelectric Load Cells
High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green
Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.
Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.
Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos.
Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos.
Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz