Accelerometers

Accelerometers from Kistler are designed for measuring vibrations, shock and motion for monitoring, control and test applications. Based on IEPE, charge output and MEMS technologies, the sensors can be applied to a wide range of applications. Accelerometers from Kistler feature a very high temperature stability and thus allow to achieve superior measurement accuracy even with large fluctuations of the ambient temperature.

Learn more about accelerometers by downloading the PDF catalogue.

sub miniature triaxial IEPE accelerometer sub-miniature dreiachsial Beschleunigungssensor integriertes Kabel

Triaxial accelerometers IEPE, KiVibe Miniature, PiezoStar crystal

Z22198

Z22198D100A

Triaxial accelerometer IEPE, KiVibe Miniature, PiezoStar crystal, 100 g

Triaxial accelerometer IEPE, KiVibe Miniature, PiezoStar crystal, 250 g

IEPE triaxial accelerometers, miniature, ceramic shear, 50 … 2000 g

8763B

8763B050BB

IEPE triaxial accelerometer, 50 g, 1/4-28, 4-pin connector

IEPE triaxial accelerometer, 100 g, 1/4-28, 4-pin connector

MEMS capacitive triaxial K-Beam accelerometers for low-frequency applications, 2 … 200 g

8396A

MEMS capacitive triaxial K-Beam accelerometer, 2 g, titanium housing

MEMS capacitive triaxial K-Beam accelerometer, 2 g, titanium housing, 4 V FSO

Miniature IEPE triaxial PiezoStar accelerometers, 250 … 2000 g

8766A

8766A250BB

IEPE triaxial accelerometer PiezoStar, 250 g, 1/4-28, 4-pin connector

IEPE triaxial accelerometer PiezoStar, 500 g, 1/4-28, 4-pin connector

MEMS capacitive K-Beam accelerometers for low-frequency applications, 2 … 200 g

8316A

MEMS capacitive K-Beam accelerometer

MEMS capacitive K-Beam accelerometer, 2 g, titanium housing, 4 V FSO

General purpose accelerometers K-Shear, 25 … 500 g, side connector

8702B

8702B25

General purpose accelerometer K-Shear, 25 g

General purpose accelerometer K-Shear, 50 g

Cryo and high-temperature PiezoStar accelerometers, 50 … 250 g

8703A

8703A50M1

Accelerometer PiezoStar, 50 g, ground isolated

Accelerometer PiezoStar, 250 g, ground isolated

General purpose K-Shear accelerometers, 25 … 5000 g, top connector

8704B

8704B25

General purpose accelerometer K-Shear, 25 g

General purpose accelerometer K-Shear, 50 g

Multipurpose accelerometers, lightweight, ceramic shear, 50 … 500 g, side connector

8776B

8776B050S

Multipurpose lightweight accelerometer with side connector, 50 g, stud mount

Multipurpose lightweight accelerometer with side connector, 100 g, stud mount

Shock accelerometers, K-Shear, 5000 … 50000 g

8742A

8742A5

Shock accelerometer K-Shear, 5000 g

Shock accelerometer K-Shear, 10000 g

Miniature triaxial IEPE accelerometers for high temperatures, PiezoStar, through hole mount

8765A

8765A250M5

Miniature triaxial accelerometer, PiezoStar, 250 g, high temperature

IEPE accelerometer, orientable, ceramic shear, 50 g

8775A

8775A050

IEPE accelerometer, orientable, ceramic shear, 50 g, 10-32 coaxial connector

IEPE accelerometer, orientable, ceramic shear, 50 g, 10-32 coaxial connector, with selectable TEDS template

Need a consultation?

Our experts are just a click away

Frequently asked questions

How do accelerometers measure acceleration?

Accelerometers use the principles of inertia and force to measure changes in velocity and acceleration. This is achieved through the use of a mass attached to a spring or piezoelectric material.

How often should I calibrate my Kistler accelerometer?

It is recommended to calibrate your Kistler accelerometer annually to ensure accurate measurements. This can also be done after any significant impact or change in operating conditions.

What is the best way to mount and install my Kistler accelerometer?

For optimal performance, make sure to use a rigid and flat surface for mounting. Avoid using adhesive when possible as this can affect the accelerometer’s performance. Please refer to each sensor’s manual for detailed instructions on installation.

Accelerometers

Categories and filters

Need a consultation?

Frequently asked questions

How do accelerometers measure acceleration?

How often should I calibrate my Kistler accelerometer?

What is the best way to mount and install my Kistler accelerometer?