Overview

オンラインのチュートリアル、クイックスタート動画、ウェビナーなどで、キスラーについてご紹介しています。

お客様のアプリケーションに必要なセンサ、測定システム、各種ソフトウエアに関する情報、正しい使用方法については、トラブルシューティングに役立つヒントを含め、弊社のエキスパートがご紹介します。このe-ラーニングは、さらに詳しく手順を追ってこれを補足するためのものです。

今後予定されているウェビナー (0)

現在のところ予定されているウェビナーはありません。

アーカイブされたウェビナー (24)
録画済み: 2021/10/18
EN
60 min
Electric motor testing for aerospace applications and beyond

Electric motors are not only conquering the automotive world, they also serve as actuators as well as main engines in many aerospace applications, from space vehicles over aircrafts to drones and new eVTOL air taxis.

Our experts will provide you with insights and best practices regarding the right measurement technology and efficient test procedures. The following topics will be covered:

  • Theory of operation (esp. torque and rotary)
  • Shaft and flange torque meters
  • Reaction torque
  • Installation
  • Use of couplings
  • Data acquisition
  • How to use outputs, ranges, resolution and dual range
  • Micro-vibration qualification with force sensors
  • Aerospace application examples
  • Test data management and analysis, e.g.:
    • Torque meter under load
    • Performance (good or bad electric motor)
    • High startup torque – low running torque
    • Reverse motor direction
    • Torque meters in a vibratory system or application

Kistler can provide you with complete measuring chains for almost all test requirements – from sensors over signal transmission and DAQ to post-processing and software – please use the Q&A session at the end of the webinar or ask Bill or Pascal for a personal follow-up meeting!

講師:
Bill Zwolinski, Business Driver
Pascal Erne, Business Driver
録画済み: 2021/11/16
EN
35 min.
Cutting force measurement – data acquisition and interpretation

In this webinar on data acquisition in cutting force measurement, you will learn how to optimize your measuring chain and interpret measurements properly. 

Data acquisition:

Bulent Tasdelen, Business Development Manager, will introduce to you the essentials for efficient data acquisition, to name just a few:

  • How to choose the right frequency ranges for milling, drilling, turning, grinding etc.
  • How to set up correct filters and sampling rates
  • How to measure the natural frequency of the dynamometers

Interpretation:

Based on various examples, you will learn about the factors that can affect the force signal (tool wear, surface quality, coolants, lubricants etc.). 

Get to know how to:

  • Apply force and torque measurement methods for cutting process analysis
  • Gain control over the cutting forces and processes
  • What can be seen in cutting force measurements
  • How to calculate the correct friction coefficient during turning processes by cutting force measurements
  • What is the correlation between cutting forces and tool deflection

 

講師:
Buelent Tasdelen, Business Development Manager
録画済み: 2021/11/11
JA
60 min
金型内部の見える化」CFRP成形に最適なセンサソリューション

アドバンテージが高い水晶圧電式型内圧センサはCFRP成形プロセスの条件に最適です。

RTMやSMC成形のような低圧測定に有効な水晶圧電式を用いて主要な成形不良を改善するためのセンシング技術を中心にご提案します

【内容】

  •  型内圧測定のアプリケーション事例と不良検知 など
  • プレス荷重、超音波溶着、切削加工に使用されるセンサ、型内圧測定以外の事例紹介

このウェビナーは2回開催いたしますが、どちらの日程も同じ内容となります。ぜひどちらかご都合のよろしい日程をお選びください

講師:
Ryota Kato, Outside Sales Representative
Suguru Kamio, Outside Sales Representative
Fumio Matsuura, Outside Sales Representative
録画済み: 2021/10/20
JA
45 min
EVモーター製造工程にみる「エラーモード見える化ソリューション」

IoTやAI技術の導入がトレンドになっている産業現場では、高いセンシング技術による様々な現象の検知とデータ化がその成功を左右します。
当ウェビナーでは、EVモーター製造工程を例に、キスラーの計測技術によるエラーモード見える化や、生産ラインに潜むお困りごとに関するソリューションを2部構成でご紹介します。

前半:モーターコア パンチング工程の監視
後半:モーター組立工程へのサーボプレスの適用について

このウェビナーは2回開催いたしますが、どちらの日程も同じ内容となります。ぜひどちらかご都合のよろしい日程をお選びください。

※登録完了後、15分してもご案内メールが届かない際には大変お手数ですが、担当営業もしくは弊社のお問い合わせフォームよりご連絡ください。

※申し訳ございませんが、競合他社様のご登録・ご参加はご遠慮いただけますよう、よろしくお願いいたします。

ウェビナーは録音・録画いたします。当日のライブ配信にご参加いただけないかたにも後日メールで動画のリンクをお送りしますので、ぜひご登録ください。

講師:
Hiroyuki Okura, Outside Sales Representative
Yoichiro Abe, Head of Sales Center JSB
録画済み: 2021/09/20
EN
60 min
Simplify RLDA tests with wireless wheel force transducers and robots

Here's your chance to discover the world's first cable-free wheel force transducer! Join our webinar and learn how KiRoad Wireless HDR will revolutionize your vehicle testing: reduced setup time, more efficient and accurate RLDA testing, optimum repeatability - and even a combined application with driving robots from Vehico.

Key Takeaways

  • Improve the efficiency and accuracy of road load data acquisition (RLDA) testing
  • Benefit from repeatable testing and results with KiRoad Wireless HDR and driving robots
  • Identify use case scenarios, check out real-time demo availability
講師:
Michael Rihl, Sales and Applications Engineer, Kistler Group
Eric Petersen, Sales Manager North America Vehicle D&D, Kistler Group
Nils Harms, Product Manager, Kistler Group
録画済み: 2021/10/19
EN
40 min
How to integrate process monitoring into your medical device production

As a medical device manufacturer, you're confronted with a multitude of mandatory national and international standards and guidelines that regulate the traceability of all your quality-relevant production data. Integrated process monitoring is already helping many medtech manufacturers to meet the challenges of compliance with these strict requirements. In this webinar, Kistler experts Stephan Vogel and Martin Lack explain how you can integrate measurement technology directly into your production line. The session begins with an introduction to the basics of this state-of-the-art approach. Then, your hosts will focus on some key issues:

  • How to choose the best sensor for your specific purpose?

The new maXYmos TL ML process monitoring and control system, specifically designed for the medtech industry:

  • What new functions does it offer you?
  • How does it ensure even better integration into medical lines?
  • Inline calibration of measuring chains: how does it work?
講師:
Stephan Vogel, Head of Business Development
Martin Lack, Head of Product Management
録画済み: 2021/10/19
EN
35 min
Miniature charge amplifier with IO Link Technology

Kistler introduces the miniature charge amplifier with IO-Link, a flexible new amplifier for today's industrial applications and suitable for use in a wide range of applications including robotics, the packaging industry and the food and beverage sector, and also ideal for OEMs. This intelligent amplifier combines analog and digital communication technology to pave the way for Industry 4.0.

 

講師:
Stefan Koch, Product Manager Business Field Production Monitoring
録画済み: 2021/08/27
EN
60 min
ECSS 2021 – European College of Sport Science Virtual Congress

Join Kistler at the ECSS 2021 – European College of Sport Science Virtual Congress  already on 7 September at the Pre-Congress!

Discover innovative solutions to integrate 3D force plates in performance analysis and biomechanical systems.

We are pleased to invite you to join us at two exciting live online presentations highlighting recent and current projects that integrate Kistler 3D force plates into performance analysis systems and explaining the physics behind them. Experts from various fields and with different backgrounds will present the following topics:

  • Stadium 4.0 – a turnkey solution from Kistler (15:00-16:00 CEST)
    Learn more about how Kistler develops biomechanical systems from scratch and how the considered technical and human interfaces will ensure high quality data.

    In addition, our biomechanics expert will give you fascinating insights into new state-of-the-art connectivity and interaction methods and demonstrate this with examples from several international projects.

  • Revealing the invisible in golf instruction - the Smart2Move 3D Kistler force plates (18:00-19:00 CEST)
    The CEO and CTO from Smart2Move will introduce an innovative golf instruction system to you. You will gain insights about why the measurement of 3D ground reaction forces by a 3D Kistler force plate is essential for golf players to improve and optimize their golf swing..
講師:
Thomas Walter, Biomechanics Expert and Sales Engineer at Kistler
Jean Paul Fernandez, Sport Scientist specialized in golf in the last 14 years and CTO of the Smart2Move AG
Gregory Lebrat, CEO and Co-Founder of the Smart2Move AG, Golf Instructor since 2003
録画済み: 2021/06/29
JA
40分
スポット溶接のインライン品質管理に役立つ加圧力測定

近年自動車メーカーでは、スポット溶接の品質管理についての要求が高まっています。
そこで本ウェビナーでは、キスラーの溶接加圧力測定ソリューションについて紹介いたします。

このウェビナーでは以下の項目についてご紹介いたします。

  • 高感度ひずみセンサの取付について
  • 加圧力測定によるスポット溶接条件の管理
  • 判定記録装置maXYmosの機能

このウェビナーは2回開催いたしますが、どちらの日程も同じ内容となります。ぜひどちらかご都合のよろしい日程をお選びください。

講師:
神尾 精(Kamio Suguru), Sales Engineer
録画済み: 2021/05/06
EN
60 min
Hydrodynamics applications measurement technology

Operators of ships and offshore facilities face multiple challenges: while safety is always the primary concern, cost efficiency and environmental aspects also need to be considered. Hydrodynamic testing systems play a key part in ensuring that these diverse requirements are met – but they must often operate in challenging conditions underwater, or with exposure to watersplash. 

Kistler can look back on decades of experience as a solution provider to the maritime research and development sector. As well as optimizing overall ship integrity, our technologies improve vessels' propulsion systems – and we also offer best-in-class solutions for offshore structures. We now invite you to join our June webinar when our experts will explore practical aspects of measurement technology for hydrodynamics applications.

This wide-ranging online session will cover:

  • The piezoelectric measurement concept: operation and capabilities
  • Measuring chains
  • Signal conditioning
  • DAQ
  • Various applications such as
  • tow tanks and wave tanks
  • water tunnels
  • sloshing
  • other
  • Q&A
講師:
Bill Zwolinski, Application Engineer Test & Measurement
Pascal Erne, Business Development Manager
録画済み: 2021/05/18
EN
30 min
100% Quality Control with Vision Inspection Systems

In this informational webinar we will present topics that are essential to quality control along with vision inspection systems. Information pertaining to risk handling and 0 PPM strategy to reduce downtime in assembly applications. Three practical applications will be covered to give you insight on what complete vision inspection systems look like and if they are the right solution for your application.

During this webinar you will learn:

  1. How do we achieve 100% quality control?
  2. What techniques are used to avoid the risks of manufacturing errors and ensure delivery of 0 PPM?
  3. Where do vision inspection systems play a role in my manufacturing process? Are vision inspection systems the right solutions for my application?
  4. Trends to use AI in industrial quality processes.

 

講師:
Stephan Bellem,
録画済み: 2021/03/31
EN
30min
Servo presses: efficient force-displacement monitoring and process control

Have you got a new application task or need to project a new line as fast as possible? Do you need to establish a new process or adjust a running one? All while avoiding any risk for malfunctioning or breakdown to assure functionality and availability of your line. If you are looking for the right system for your application that will assist with the above and necessary data such as process values, cycle times, evaluation criteria, etc. Kistler is the right partner and our servo presses/NC-joining systems are made for you!

In this webinar, we will share with you our advance consultancy competency and long-term expertise, our comprehensive product and system solutions as well as our international technical support – all from a single source.

Get to know the advantages of process-integrated electromechanical joining systems/servo presses and how you:

  • Achieve utmost process reliability thanks to 100-percent process monitoring and documentation
  • Enhance your product quality
  • Boost your plant productivity
  • Cut your operating costs
  • Play a valuable part in climate protection
講師:
Alexander Müller, Head of Business Center NC Joining Systems
録画済み: 2021/04/21
JA
1時間
「製造工程の見える化の成功の鍵」 - インプロセス測定データの活用によるゼロディフェクト生産の追求 -

その「見える化」、ただ「見えただけ」になっていませんか?

「見える化」を、スピーディに進め期待した効果をあげるには、何のために、何のデータを、どの様に収集して、収集データから改善の手掛りを見つけるか、がポイントになります。
このウェビナーでは、製造工程の見える化を、いかにして品質改善や不良低減などの効果につなげるのか、圧入工程を例にインプロセスの荷重測定データの活用の成功のポイントをご紹介します。
このウェビナーでは、
圧入工程でのインプロセスでの荷重測定データ活用事例
収集データから改善の手掛りを見つける効率の良い方法と注意点
工程監視モニタ maXYmos、ソフトウェアmaXYmos PC plusでのデータ活用のデモ
をご紹介いたします。


このウェビナーは2回開催いたしますが、どちらの日程も同じ内容となります。是非どちらかご都合のよい日程をお選びください。

講師:
分部 靖 (Yasushi Wakebe), Sales Engineer
録画済み: 2021/02/25
EN
60 min
Dynamic Force Measurement: Quality Improvement in Semiconductor Production Processes

The advancements in semiconductor technology and added device complexity put additional pressure on monitoring and controlling semiconductor manufacturing processes. Improved methods for process monitoring and failure identification are needed to maintain or improve the quality and yield of a packaging process. Let our experts Robert Hillinger and Jim Macy explain you how Kistler can help you to improve the quality and performance of your semiconductor production.

講師:
Robert Hillinger, Business Development Manager, Kistler Group
Jim Macy, Application Expert, Kistler Group
録画済み: 2021/03/02
EN
60 min
Practical considerations for Force Limited Vibration Testing

Traditional vibration testing using response accelerometers and hard mounting the space equipment or satellite to a shaker could result in overtesting, destruction, overdesign and/or excessive cost/schedule impact if the unit under test is broken.

Overtesting failures can be eliminated by limiting the vibratory force to that predicted for the actual flight. “Force limiting” automatically notches the acceleration at a test item's resonances, by measuring and limiting the reaction force between the test item and the shaker table. FLV testing replicates the test article's resonant response for the actual flight mounting condition.

講師:
Bill Zwolinski, Application Engineer Test & Measurement, Kistler Group
Chris Wilcox, Sales Manager Americas, m+p International
録画済み: 2021/02/25
JA
1時間
半導体樹脂封止の「金型内部の見える化ソリューション」とIoT技術

アドバンテージが高い水晶圧電式型内圧センサは半導体封止の条件に最適です。

エポキシトランスファ成形のような低圧測定に有効な水晶圧電式を用いて主要な成形不良を改善するためのセンシング技術をご提案します。

  • 低粘度樹脂対応⇒エポキシ樹脂の侵入による測定誤差が生じない構造(ダイヤフラム構造)
  • 高温対応⇒金型温度200℃まで
  • 耐久性⇒半永久的
  • 直線性(測定誤差)⇒測定レンジに対して1%以下を保証
  • 分解能⇒1/1,000MPa

ウェビナーは2回開催いたしますが、どちらの日程も同じ内容となります。ぜひどちらかご都合のよろしい日程をお選びください。
ウェビナーは録音・録画いたします。当日のライブ配信にご参加いただけないかたにも後日メールで動画のリンクをお送りしますので、ぜひご登録ください。

講師:
加藤 良太(Ryota Kato), Sales Engineer
録画済み: 2020/11/19
EN
EN
60 min
Measurement technology for hydrodynamics applications – practical aspects

Kistler invites you to join our webinar with Bill Zwolinski to learn more about measurement technology for hydrodynamics applications, with the emphasis on practical aspects.

Agenda of the webinar:

  • The piezoelectric measurement concept: operation and capabilities
  • Measuring chainsSignal conditioning
  • DAQ
  • Various applications such as: tow tanks and wave tanks, water tunnels, sloshing, otherQ&A
講師:
Bill Zwolinski, Application Engineer
録画済み: 2020/11/04
EN
EN
60 min
Online training: How to operate maXYmos TL ML in medical/pharmaceutical manufacturing

Following our recent online introduction of the maXYmos TL ML process monitoring system, we warmly invite you to join our detailed training on how it operates and how you can individually adjust and apply its functionalities. 

The aim of this training is to enable you to achieve a 100 percent process monitoring and evaluation process across the entire measuring chain. This will allow your products to pass the final quality testing with zero defect and to comply with the strict regulations regarding quality assurance in medical and pharmaceutical manufacturing.

講師:
Dipl. Ing. (FH), MBA Martin Lack, Team Leader Product Management
録画済み: 2020/11/03
EN
EN
6 min
Calibration certificates – Updates 2020

Learn about updates in calibration certificates for traceable calibrations caused by updated 17025:2017.

For further information please download this brochure.

https://www.kistler.com/en/services/training/type-9966b28-13-mmk01/ 

講師:
Peter Jaeger, Metrology expert
録画済み: 2020/11/03
EN
EN
8 min
Calibration intervals – Initial interval and interval adjustment

A brief introduction chosing an initial calibration interval and adjust intervals.

For further information please download this brochure.

https://www.kistler.com/en/services/training/type-9966b28-13-mmk01/

講師:
Peter Jaeger, Metrology expert
録画済み: 2020/11/03
EN
EN
6 min
Statement of conformity and decision rule

Learn about statements of conformity in calibration certificates for traceable calibrations and the decision rules behind those.

For further information please download this brochure.

https://www.kistler.com/en/services/training/type-9966b28-13-mmk01/

講師:
Peter Jaeger, Metrology expert
録画済み: 2020/10/15
EN
EN
60 min
Multicomponent force measurement from Kistler for space – applications (Session 2)

Now we invite you to share more of our know-how at the second webinar in our series, when Application Engineer Bill Zwolinski will explore applications for multicomponent force measurement technology. Take this opportunity to learn exactly why Kistler is renowned for pushing measurement technology to the outer limits!

In this wide-ranging webinar, Bill Zwolinski will cover:

  • test environment considerations (noise, vacuum and more)
  • micro-vibrations / exported force and torque (EFT)
  • force-limited vibration
  • propulsion testing
  • summary and conclusions
  • followed by a chance to get answers to your questions from an industry insider
講師:
Bill Zwolinski, Application Engineer
録画済み: 2020/09/24
EN
EN
60 min
Multicomponent force measurement from Kistler for space applications – practical aspects (Session 1)

We invite you to join our webinar to learn more about multicomponent force measurement for space applications with emphasis on practical aspects. 
As industry insiders, we focus on developing reliable and precise solutions for space applications. We put theory into practice as we work in partnership with renowned aerospace companies. In this online session, we will gladly share some of our accumulated hands-on experience with you to increase your awareness.

Application Engineer Bill Zwolinski will begin this webinar by exploring PE theory, followed by an overview of measuring chains. He will go on to consider practical aspects of force/moment measurement such as mounting, installation and checkout. You will also gain insights into Kistler specialties such as instrumentation for exported force and torque (EFT) measurement, force-limited vibration testing (FLVT)and thrust stand measurements. Then we will turn to you to ask questions to wrap up the webinar

講師:
Bill Zwolinski, Application Engineer
録画済み: 2020/06/09
EN
EN
59 min
Calibration Fundamentals

Calibration is the basis for precise measurements with every measurement equipment. This webinar explains the added value provided by periodic calibrations. It is crucial to have a good understanding of the calibration topic to first obtain correct measurement results and handle your devices correctly and second fulfill the normative requirements by norms such as the ISO9001 or the IATF16949.

講師:
Peter Jäger, Service Operations Manager
詳細を表示する
お問合せ
Max 25 MB