Process-reliable series production and cost efficiency

Novi, MI, USA, 24 February 2015 – At this year's NPE from March 23-27, 201 Kistler will be presenting sensors and systems for inspecting the quality of injection molding processes. Visitors can also be inspired by the newly developed CoMo DataCenter 2.0 (CDC), which offers diverse and sophisticated op-tions for documenting and evaluating production data from the CoMo Injection System.


Integrated process monitoring for 100 % quality
Comprehensive process monitoring pursues clear goals: 100 % quality in series production, zero-defect production, and minimal manufacturing costs as a result. Sensors and systems by Kistler turn these objectives into reality. They measure and analyze the cavity pressure in injection molding, monitor the process and filter rejects out as soon as they occur. Integrating quality inspection into the actual injection molding process itself brings about considerable technical and economic advantages, such as cost reduction and time savings, for example. The costs of poor quality can be slashed thanks to products by Kistler.
Kistler offers customers a portfolio of sensors and systems for measuring and analyzing cavity pressure that has been developed over many decades. As a result, Kistler has just the right sensor technology for every kind of process. Using cavity pressure systems by Kistler facilitates comprehensive control of the injection molding process and helps achieve zero-defect production. The progressions of cavity pressure measured during production clearly represent the quality of the produced molded parts and can therefore be used for documentation purposes.


Customer-friendly and efficient
Kistler is continually developing its products. They become not only more efficient but are also much simpler to use thanks to technical innovations. One example is the miniature cavity pressure sensors with exchangeable cables. If the sensor cable is damaged during injection molding, it can now be replaced on-site by the user quickly and easily. This provides greater flexibility when using these sensors and saves costs in the procurement of spare parts. In addition to the Type 6183C pressure sensor with a 1-millimeter front, the Type 6182C with a 2.5-millimeter front is now also available with an exchangeable cable. The basic type of this sensor can also be mounted with a charge-bearing spacer sleeve perfectly fitting to the specific requirements of each individual injection molding tool. Here, the charge signal from the sensor is transmitted directly to a contact element in the tool-ing insert via the charge-bearing spacer sleeve without any need for a cable. This installation facilitates easy handling of the mold insert for maintenance and repair work. In addition, the design and manufacturing of the mounting bore is also simpler with the charge-bearing spacer sleeve, as the spacer sleeve is screwed into place at the sensor itself and therefore does not need to be attached separately to the mold insert.


Multi-machine data management and analysis
The newly developed CoMo DataCenter 2.0 (CDC) provides not only an overview of the status of each injection molding machine, but also the option for production monitoring and process analysis, also on mobile devices. CDC links all the user's CoMo Injection Systems, even across different production sites, seamlessly combining process- and quality-related production data for both live and completed orders in one database. This ensures unlimited comparability of data – and fulfills the growing customer demand for documentation and traceability of production data.


Kistler will be presenting its products for comprehensive monitoring of the injection mold-ing process at NPE in Orlando, March 23 -27, 2015 at stand W3063 in hall B.

Press Release

Captions
Image 1: If the cable of the cavity pressure sensor Type 6183C is damaged, it can be replaced on-site by the user quickly and easily.
Image 2: CoMo DataCenter 2.0 links all the user's CoMo Injection Systems, even across different facilities, seamlessly com-bining process- and quality-related production data for both live and completed orders in one database.

 

Media contact
Simone Koch
Divisional Marketing Manager IPC
Phone +41 52 2241 802
E-mail: simone.koch@kistler.com

プレスキット

メディア向けにキスラーの会社概要を説明する資料をご用意しております。(英文のみ): s

2017/10/12
At the SPS IPC Drives Kistler Group will unveil the world's first digital charge amplifier Type 5974A, a...
2017/10/09
Kistler's Type 5074A industrial charge amplifier breaks new ground in industrial charge amplifier technology
2017/10/06
Whether hybrid drives or electric vehicles: anyone who wants to make a change needs to measure and understand
2017/09/27
Our experts will present you Kistler measuring technologies for demanding space applications.
2017/09/05
At Fakuma 2017, we will demonstrate how you can benefit from new ComoNeo functionalities
2017/08/31
Kistler Group showcases the entire spectrum of its integrated quality assurance solutions
2017/08/25
Kistler Group took over near Karlsruhe-based Vester Elektronik GmbH on 25 August, a specialist in sensor...
2017/08/11
Jaguar Land Rover uses Kistler RoaDyn® Wheel Force Transducers for accurate tyre modelling
2017/07/11
Kistler is taking over IOS GmbH (Germany), provider of Manufacturing Execution Systems (MES).
2017/07/06
Tettnang-based firm eso GmbH was acquired by the Kistler Group on July 5.
2017/06/20
Perfect production data synchronization through direct MES system integration.
2017/05/02
Kistler presents innovative measurement equipment for demanding vehicle testing applications
2017/04/25
At Moulding Expo 2017, we will show how easy it is to install the measurement technology needed for quality...
2017/04/12
Kistler will be present at Control, the world's leading quality assurance trade fair.
2017/04/12
Advanced features for LabAmp family maximize flexibility for cutting force users.
2017/04/11
Measuring equipment for sophisticated T&M applications
2017/02/01
The Kistler Group is constantly growing and recruiting specialist staff worldwide.
2017/01/17
Olympic champion Anthony Ervin and Kistler create a Success Story together.
2016/12/02
Kistler seeks more than 40 specialists in what is likely Switzerland's largest job advertisement.
2016/10/27
At this year's SPS IPC Drives in Nuremberg Kistler will premiere laboratory systems to analyze bolted joints,...
2016/10/21
Kistler boosts the efficiency and reliability of large marine and stationary engines through monitoring and...
2016/10/19
Kistler is presenting the new versions of its ComoNeo and ComoDataCenter.
2016/10/10
Kistler is unveiling a new addition to its portfolio of electromechanical joining modules.
2016/09/30
The Kistler Group reported incoming orders worth CHF 233.3 million at the end of August 2016 and has therefore...
2016/09/07
At this year's K Trade Fair from 19 to 26 October in Düsseldorf, Kistler will be showcasing its latest new...
2016/07/24
Kistler will be showcasing its new NCFE and NCFR joining modules, together with the latest generation of...
2016/07/12
Kistler's Correvit® SFII sensor measures world record in 1.513 seconds
2016/05/12
Screw technology complements the range of applications.
2016/04/27
Following a long phase of planning, preparations, and conversion work, Kistler Instrumente GmbH has a new home...
2016/02/12
Kistler Lorch GmbH Honored for Outstanding Qualities as Employer
2016/02/02
The Kistler Group has overcome currency-related challenges at its Swiss site to achieve continued growth.
2016/01/28
Accurate Wheel Force Measurement with Minimum Configuration Effort
2015/11/26
Increased Flexibility for High-Speed Combustion Analysis
2015/11/02
New Piezoresistive Sensor with Temperature Probe and Integrated Signal Conditioning.
2015/10/27
Kistler Provides Maximum Flexibility for Product Testing and Development
2015/10/16
Kistler's NCFR Joining Module honored in the handling and assembly category
2015/10/05
Setting the Standard for 100% Control of Linear Joining Processes with Partial Rotation
2015/09/18
Kistler Group: safeguarding the firm's competitive edge.
2015/09/15
Quick evaluation of performance and force with Kistler MARS 2.1.
2015/09/03
Major update for Kistler’s mobile engine indication system.
2015/09/01
Setting New Standards in Automated Process Monitoring for Injection Molding.
2015/08/25
Kistler Showcases Three Latest Product Innovations at Motek 2015
2015/06/29
Kistler Automotive GmbH honored as one of Germany's most innovative companies
2015/06/26
Kistler honored with ASCO Award Gold for best corporate transformation in Switzerland.
2015/06/26
Kistler's software for force plates offers a host of new features for performance diagnostics in sports and...