Measuring technology is key to development of new drive technologies

Winterthur, 6 October 2017 – The automobile industry is facing major political pressure to launch alternative drive technologies. The sector is therefore gearing up for the transformation of combustion engines. Future developments will be shaped by an increased demand for hybrid and electric vehicles, as well as self-driving vehicles. The Kistler Group offers a range of measuring technology that can be applied to this end.

The Swiss company generates as much as 70% of its sales revenue from measuring technology for the automobile industry. In crash tests as well as durability and endurance tests, the measuring technology is similar regardless of the particular drive technology. In contrast, measurements in engine research and development are directly affected by the transformation of the combustion engine.

No decline in sight for the combustion engine

Jürg Stadler, Head of Engine Research and Development at Kistler, explains why the combustion engine will remain important in the medium term: “In order to achieve the CO2 emission reduction targets, combustion engines will need to be enhanced and developed further. Combustion engines will continue to be used in hybrid drives or drives with energy recovery features.” This year’s Bloomberg New Energy Finance Report1 also surmises that sales of vehicles with combustion engines will remain steady. Diesel however will become less significant as a result of the disproportionate increase in costs: the stricter the emission limit, the higher the cost of exhaust emission treatment. Combined with the current political climate the diesel engine’s image has suffered significant damage, which could influence consumers’ willingness to invest.

Measuring technology is key

The industry will focus on the development of innovative gasoline engines and sustainable electric vehicles. Kistler’s innovative measuring technology can help address the growing demands of the automobile market – including new markets in emerging economies. “We expect to see the demand for intelligent measurement solutions rise as a result of increasingly complex drives and stricter safety requirements, as well as trends, such as self-driving vehicles. Change will require comprehensive measurements and a deep understanding of the industry – especially if the vehicle of the future is fully automated and driverless,” says Stadler.

Unbridled growth

This year, the Kistler Group reinforced its market position with three acquisitions. Its range of Industry 4.0 (Vester Elektronik GmbH, IOS GmbH) and transport safety (eso GmbH) solutions was consequently strengthened. “Thanks to our comprehensive portfolio and pioneering technologies, we are now well equipped to face any future challenges in the automobile industry, including Industry 4.0,” Rolf Sonderegger, CEO of the Kistler Group, says.

The Swiss measuring technology experts received orders worth approximately 325.2 million US dollar by the end of September 2017, which accounts for a 19.2 % growth compared to the same period last year, or 19.4 % when adjusted for currency effects. Kistler currently employs 1,850 staff members at 61 sites across the world.

Media contact
Alexandra Sasidharan-Scherrer
Corporate Communications
Tel.: +41 52 224 15 95
E-Mail: alexandra.sasidharan-scherrer@kistler.com

プレスキット

キスラー会社概要:キスラープレスキット

2018/05/09
At Sensor + Test 2018 Kistler will be introducing a milestone in measurement technology: its new KiDAQ data...
2018/05/08
At NPE 2018, the Kistler Group is showcasing its latest custom monitoring package for ComoNeo, its...
2018/05/03
At Automatica 2018, the Kistler Group will turn the spotlight on diverse options for using sensors and process...
2018/04/24
The Kistler Group will showcase its expanded portfolio of industrial test and inspection systems for quality...
2018/04/12
The global leader in dynamic measurement technology supports the passion for innovation and technology with a...
2018/03/06
Kistler will be showcasing at Control 2018 its portfolio of industrial testing and inspection systems with the...
2018/02/16
At Intertraffic 2018 the Kistler Group is showcasing its comprehensive KiTraffic Weigh In Motion (WIM)...
2018/01/24
Kistler achieved a growth rate of 18 % in 2017. Digital transformation has top priority in 2018.
2018/01/23
Overcoming the complexities of RTM – with Kistler
2018/01/06
キスラー社の新しいスプリントシステム(KiSprint)は、競技条件下でのスタートダッシュを生体力学的に最適化する効率的な手段をトレーナーとアスリートに提供します。堅牢な可動式システムでは、ソフトウェアによる総合的な評価...
2017/10/12
At the SPS IPC Drives Kistler Group will unveil the world's first digital charge amplifier Type 5974A, a...
2017/10/09
Kistler's Type 5074A industrial charge amplifier breaks new ground in industrial charge amplifier technology
2017/10/06
Whether hybrid drives or electric vehicles: anyone who wants to make a change needs to measure and understand
2017/09/27
Our experts will present you Kistler measuring technologies for demanding space applications.
2017/09/05
At Fakuma 2017, we will demonstrate how you can benefit from new ComoNeo functionalities
2017/08/31
Kistler Group showcases the entire spectrum of its integrated quality assurance solutions
2017/08/25
Kistler Group took over near Karlsruhe-based Vester Elektronik GmbH on 25 August, a specialist in sensor...
2017/08/11
Jaguar Land Rover uses Kistler RoaDyn® Wheel Force Transducers for accurate tyre modelling
2017/07/11
Kistler is taking over IOS GmbH (Germany), provider of Manufacturing Execution Systems (MES).
2017/07/06
Tettnang-based firm eso GmbH was acquired by the Kistler Group on July 5.
2017/06/20
Perfect production data synchronization through direct MES system integration.
2017/05/02
Kistler presents innovative measurement equipment for demanding vehicle testing applications
2017/04/25
At Moulding Expo 2017, we will show how easy it is to install the measurement technology needed for quality...
2017/04/12
Kistler will be present at Control, the world's leading quality assurance trade fair.
2017/04/12
Advanced features for LabAmp family maximize flexibility for cutting force users.
2017/04/11
Measuring equipment for sophisticated T&M applications
2017/02/01
The Kistler Group is constantly growing and recruiting specialist staff worldwide.
2017/01/17
Olympic champion Anthony Ervin and Kistler create a Success Story together.
2016/12/02
Kistler seeks more than 40 specialists in what is likely Switzerland's largest job advertisement.
2016/10/27
At this year's SPS IPC Drives in Nuremberg Kistler will premiere laboratory systems to analyze bolted joints,...
2016/10/21
Kistler boosts the efficiency and reliability of large marine and stationary engines through monitoring and...
2016/10/19
Kistler is presenting the new versions of its ComoNeo and ComoDataCenter.
2016/10/10
Kistler is unveiling a new addition to its portfolio of electromechanical joining modules.
2016/09/30
The Kistler Group reported incoming orders worth CHF 233.3 million at the end of August 2016 and has therefore...
2016/09/07
At this year's K Trade Fair from 19 to 26 October in Düsseldorf, Kistler will be showcasing its latest new...
2016/07/24
Kistler will be showcasing its new NCFE and NCFR joining modules, together with the latest generation of...
2016/07/12
Kistler's Correvit® SFII sensor measures world record in 1.513 seconds
2016/05/12
Screw technology complements the range of applications.
2016/04/27
Following a long phase of planning, preparations, and conversion work, Kistler Instrumente GmbH has a new home...
2016/02/12
Kistler Lorch GmbH Honored for Outstanding Qualities as Employer
2016/02/02
The Kistler Group has overcome currency-related challenges at its Swiss site to achieve continued growth.
2016/01/28
Accurate Wheel Force Measurement with Minimum Configuration Effort
2015/11/26
Increased Flexibility for High-Speed Combustion Analysis
2015/11/02
New Piezoresistive Sensor with Temperature Probe and Integrated Signal Conditioning.
2015/10/27
Kistler Provides Maximum Flexibility for Product Testing and Development
2015/10/16
Kistler's NCFR Joining Module honored in the handling and assembly category
2015/10/05
Setting the Standard for 100% Control of Linear Joining Processes with Partial Rotation
2015/09/18
Kistler Group: safeguarding the firm's competitive edge.
2015/09/15
Quick evaluation of performance and force with Kistler MARS 2.1.
2015/09/03
Major update for Kistler’s mobile engine indication system.
2015/09/01
Setting New Standards in Automated Process Monitoring for Injection Molding.
2015/08/25
Kistler Showcases Three Latest Product Innovations at Motek 2015
2015/06/29
Kistler Automotive GmbH honored as one of Germany's most innovative companies
2015/06/26
Kistler honored with ASCO Award Gold for best corporate transformation in Switzerland.
2015/06/26
Kistler's software for force plates offers a host of new features for performance diagnostics in sports and...