Overview

Stay on track with Kistler online tutorials, quick start videos and webinars

Our experts will be presenting you information about what kind of sensors, measurement systems or software you need for which application and how to handle them correctly, including valuable tips for troubleshooting. We’re going to complement this e-learning offering step by step.

Webinar in arrivo (1)
18/11/2021 10:00 CET (UTC+1)
13:00 EST (UTC-5)
EN
60 min
Electric motor testing for aerospace applications and beyond

Electric motors are not only conquering the automotive world, they also serve as actuators as well as main engines in many aerospace applications, from space vehicles over aircrafts to drones and new eVTOL air taxis.

Our experts will provide you with insights and best practices regarding the right measurement technology and efficient test procedures. The following topics will be covered:

  • Theory of operation (esp. torque and rotary)
  • Shaft and flange torque meters
  • Reaction torque
  • Installation
  • Use of couplings
  • Data acquisition
  • How to use outputs, ranges, resolution and dual range
  • Micro-vibration qualification with force sensors
  • Aerospace application examples
  • Test data management and analysis, e.g.:
    • Torque meter under load
    • Performance (good or bad electric motor)
    • High startup torque – low running torque
    • Reverse motor direction
    • Torque meters in a vibratory system or application

Kistler can provide you with complete measuring chains for almost all test requirements – from sensors over signal transmission and DAQ to post-processing and software – please use the Q&A session at the end of the webinar or ask Bill or Pascal for a personal follow-up meeting!

Relatori:
Bill Zwolinski, Business Driver
Pascal Erne, Business Driver
Webinar in archivio (49)
Registrazione: 19/10/2021
EN
40 min
How to integrate process monitoring into your medical device production

As a medical device manufacturer, you're confronted with a multitude of mandatory national and international standards and guidelines that regulate the traceability of all your quality-relevant production data. Integrated process monitoring is already helping many medtech manufacturers to meet the challenges of compliance with these strict requirements. At our webinar on Tuesday 19 October, Kistler experts Stephan Vogel and Martin Lack will explain how you can integrate measurement technology directly into your production line. The session begins with an introduction to the basics of this state-of-the-art approach. Then, your hosts will focus on some key issues:

  • How to choose the best sensor for your specific purpose?
  • The new maXYmos TL ML process monitoring and control system, specifically designed for the medtech industry:
    – What new functions does it offer you?
    – How does it ensure even better integration into medical lines?
  • Inline calibration of measuring chains: how does it work?

To round off this deep dive into transparent and traceable monitoring in medical device manufacturing, Stefan and Martin will share their expertise with you.

Relatori:
Stephan Vogel, Head of Business Development
Martin Lack, Head of Product Management
Registrazione: 27/08/2021
EN
60 min
ECSS 2021 – European College of Sport Science Virtual Congress

Join Kistler at the ECSS 2021 – European College of Sport Science Virtual Congress  already on 7 September at the Pre-Congress!

Discover innovative solutions to integrate 3D force plates in performance analysis and biomechanical systems.

We are pleased to invite you to join us at two exciting live online presentations highlighting recent and current projects that integrate Kistler 3D force plates into performance analysis systems and explaining the physics behind them. Experts from various fields and with different backgrounds will present the following topics:

  • Stadium 4.0 – a turnkey solution from Kistler (15:00-16:00 CEST)
    Learn more about how Kistler develops biomechanical systems from scratch and how the considered technical and human interfaces will ensure high quality data.

    In addition, our biomechanics expert will give you fascinating insights into new state-of-the-art connectivity and interaction methods and demonstrate this with examples from several international projects.

  • Revealing the invisible in golf instruction - the Smart2Move 3D Kistler force plates (18:00-19:00 CEST)
    The CEO and CTO from Smart2Move will introduce an innovative golf instruction system to you. You will gain insights about why the measurement of 3D ground reaction forces by a 3D Kistler force plate is essential for golf players to improve and optimize their golf swing..
Relatori:
Thomas Walter, Biomechanics Expert and Sales Engineer at Kistler
Jean Paul Fernandez, Sport Scientist specialized in golf in the last 14 years and CTO of the Smart2Move AG
Gregory Lebrat, CEO and Co-Founder of the Smart2Move AG, Golf Instructor since 2003
Registrazione: 08/07/2021
IT
120 min
Structural Health Monitoring

Questo seminario si propone di dare un punto di vista oggettivo a chi si occupa, o si occuperà, di queste tematiche, cercando di far luce sulle possibili soluzioni rispetto alle problematiche più comuni sia in termini di approccio al problema, sia in termini di strumentazione da utilizzare per lavorare in modo efficace.

Nella sede di Lecco del Politecnico di Milano è altresì presente una Mostra Permanente dell'architetto Pier Luigi Nervi, dedicata alle sue opere nello sviluppo della tecnica e dell'arte delle Costruzioni.

L'accesso alla partecipazione presso la sede di Lecco del Politecnico di Milano è consentito, per ragioni di sicurezza, ad un numero limitato di persone; verrà considerato ai fini della prenotazione del posto l'ordine cronologico di iscrizione.

Se pertanto siete interessati alla partecipazione vi invitiamo a riservare quanto prima il vostro posto.

Relatori:
Federico Germano, Sales Specialist Test & Measurement
Francesco Caraglia, Sales Specialist Traffic Solution
Rolf Lussi, Solution Architect
Prof. Marco di Prisco, Docente Ordinario di Tecnica delle Costruzioni
Ing. Giulio Zani, Ricercatore di Tecnica delle Costruzioni, Politecnico di Milano
Registrazione: 06/05/2021
EN
60 min
Hydrodynamics applications measurement technology

Operators of ships and offshore facilities face multiple challenges: while safety is always the primary concern, cost efficiency and environmental aspects also need to be considered. Hydrodynamic testing systems play a key part in ensuring that these diverse requirements are met – but they must often operate in challenging conditions underwater, or with exposure to watersplash. 

Kistler can look back on decades of experience as a solution provider to the maritime research and development sector. As well as optimizing overall ship integrity, our technologies improve vessels' propulsion systems – and we also offer best-in-class solutions for offshore structures. We now invite you to join our June webinar when our experts will explore practical aspects of measurement technology for hydrodynamics applications.

This wide-ranging online session will cover:

  • The piezoelectric measurement concept: operation and capabilities
  • Measuring chains
  • Signal conditioning
  • DAQ
  • Various applications such as
  • tow tanks and wave tanks
  • water tunnels
  • sloshing
  • other
  • Q&A
Relatori:
Bill Zwolinski, Application Engineer Test & Measurement
Pascal Erne, Business Development Manager
Registrazione: 18/05/2021
EN
30 min
100% Quality Control with Vision Inspection Systems

In this informational webinar we will present topics that are essential to quality control along with vision inspection systems. Information pertaining to risk handling and 0 PPM strategy to reduce downtime in assembly applications. Three practical applications will be covered to give you insight on what complete vision inspection systems look like and if they are the right solution for your application.

During this webinar you will learn:

  1. How do we achieve 100% quality control?
  2. What techniques are used to avoid the risks of manufacturing errors and ensure delivery of 0 PPM?
  3. Where do vision inspection systems play a role in my manufacturing process? Are vision inspection systems the right solutions for my application?
  4. Trends to use AI in industrial quality processes.

 

Relatori:
Stephan Bellem,
Registrazione: 31/03/2021
EN
30min
Servo presses: efficient force-displacement monitoring and process control

Have you got a new application task or need to project a new line as fast as possible? Do you need to establish a new process or adjust a running one? All while avoiding any risk for malfunctioning or breakdown to assure functionality and availability of your line. If you are looking for the right system for your application that will assist with the above and necessary data such as process values, cycle times, evaluation criteria, etc. Kistler is the right partner and our servo presses/NC-joining systems are made for you!

In this webinar, we will share with you our advance consultancy competency and long-term expertise, our comprehensive product and system solutions as well as our international technical support – all from a single source.

Get to know the advantages of process-integrated electromechanical joining systems/servo presses and how you:

  • Achieve utmost process reliability thanks to 100-percent process monitoring and documentation
  • Enhance your product quality
  • Boost your plant productivity
  • Cut your operating costs
  • Play a valuable part in climate protection
Relatori:
Alexander Müller, Head of Business Center NC Joining Systems
Registrazione: 25/02/2021
EN
60 min
Dynamic Force Measurement: Quality Improvement in Semiconductor Production Processes

The advancements in semiconductor technology and added device complexity put additional pressure on monitoring and controlling semiconductor manufacturing processes. Improved methods for process monitoring and failure identification are needed to maintain or improve the quality and yield of a packaging process. Let our experts Robert Hillinger and Jim Macy explain you how Kistler can help you to improve the quality and performance of your semiconductor production.

Relatori:
Robert Hillinger, Business Development Manager, Kistler Group
Jim Macy, Application Expert, Kistler Group
Registrazione: 19/03/2021
EN
45 min
Put up a right Cutting Force measurement system

The webinar describes how to set-up the hardware and software for force measurement by using stationary dynamometer and our DAQ/amplifier LabAmp. Moreover, the analysis of the forces with the software Dynoware is also described. Lastly, important hints are given to manage drift and to improve signal quality and understand the signals.

Relatori:
Buelent Tasdelen, Business Development Manager
Registrazione: 02/03/2021
EN
60 min
Practical considerations for Force Limited Vibration Testing

Traditional vibration testing using response accelerometers and hard mounting the space equipment or satellite to a shaker could result in overtesting, destruction, overdesign and/or excessive cost/schedule impact if the unit under test is broken.

Overtesting failures can be eliminated by limiting the vibratory force to that predicted for the actual flight. “Force limiting” automatically notches the acceleration at a test item's resonances, by measuring and limiting the reaction force between the test item and the shaker table. FLV testing replicates the test article's resonant response for the actual flight mounting condition.

Relatori:
Bill Zwolinski, Application Engineer Test & Measurement, Kistler Group
Chris Wilcox, Sales Manager Americas, m+p International
Registrazione: 27/11/2020
EN
EN
60 min
How to achieve machining excellence through monitoring and control

In this webinar Bülent Taşdelen will explain the three steps to excellence: ensuring machine accuracy, using the correct process settings, and implementing sensor technologies to evaluate machine and process conditions – paving the way to intelligent machining. 

Relatori:
Bülent Taşdelen, Business Development Manager
Registrazione: 19/11/2020
EN
EN
60 min
Measurement technology for hydrodynamics applications – practical aspects

Kistler invites you to join our webinar with Bill Zwolinski to learn more about measurement technology for hydrodynamics applications, with the emphasis on practical aspects.

Agenda of the webinar:

  • The piezoelectric measurement concept: operation and capabilities
  • Measuring chainsSignal conditioning
  • DAQ
  • Various applications such as: tow tanks and wave tanks, water tunnels, sloshing, otherQ&A
Relatori:
Bill Zwolinski, Application Engineer
Registrazione: 04/11/2020
EN
EN
60 min
Online training: How to operate maXYmos TL ML in medical/pharmaceutical manufacturing

Following our recent online introduction of the maXYmos TL ML process monitoring system, we warmly invite you to join our detailed training on how it operates and how you can individually adjust and apply its functionalities. 

The aim of this training is to enable you to achieve a 100 percent process monitoring and evaluation process across the entire measuring chain. This will allow your products to pass the final quality testing with zero defect and to comply with the strict regulations regarding quality assurance in medical and pharmaceutical manufacturing.

Relatori:
Dipl. Ing. (FH), MBA Martin Lack, Team Leader Product Management
Registrazione: 03/11/2020
EN
EN
6 min
Calibration certificates – Updates 2020

Learn about updates in calibration certificates for traceable calibrations caused by updated 17025:2017.

For further information please download this brochure.

https://www.kistler.com/en/services/training/type-9966b28-13-mmk01/ 

Relatori:
Peter Jaeger, Metrology expert
Registrazione: 03/11/2020
EN
EN
8 min
Calibration intervals – Initial interval and interval adjustment

A brief introduction chosing an initial calibration interval and adjust intervals.

For further information please download this brochure.

https://www.kistler.com/en/services/training/type-9966b28-13-mmk01/

Relatori:
Peter Jaeger, Metrology expert
Registrazione: 03/11/2020
EN
EN
6 min
Statement of conformity and decision rule

Learn about statements of conformity in calibration certificates for traceable calibrations and the decision rules behind those.

For further information please download this brochure.

https://www.kistler.com/en/services/training/type-9966b28-13-mmk01/

Relatori:
Peter Jaeger, Metrology expert
Registrazione: 20/10/2020
EN
EN
60 min
The right way to use Big Test Data (R&D) – Measurement data solutions

As a leading system provider of measurement technology solutions, Kistler supplies high-precision sensors and reliable data acquisition systems. Now, the portfolio has been expanded with the addition of customer centric services and comprehensive analytical software for complex test applications.

Kistler offers its customers the entire measuring chain for vehicle development – from individual sensors to software systems that can evaluate vast quantities of data.

These intelligent, complete solutions from one single source help to make vehicles safer and more robust while boosting performance and efficiency.

Relatori:
Sebastian Keimer, Business driver Big Measurement Data
Sam Olesky, Engine applications specialist
Registrazione: 15/10/2020
EN
EN
60 min
Multicomponent force measurement from Kistler for space – applications (Session 2)

Now we invite you to share more of our know-how at the second webinar in our series, when Application Engineer Bill Zwolinski will explore applications for multicomponent force measurement technology. Take this opportunity to learn exactly why Kistler is renowned for pushing measurement technology to the outer limits!

In this wide-ranging webinar, Bill Zwolinski will cover:

  • test environment considerations (noise, vacuum and more)
  • micro-vibrations / exported force and torque (EFT)
  • force-limited vibration
  • propulsion testing
  • summary and conclusions
  • followed by a chance to get answers to your questions from an industry insider
Relatori:
Bill Zwolinski, Application Engineer
Registrazione: 14/10/2020
EN
EN
40 min
Apply electromechanical joining systems/servo presses and save CO₂ and costs

Servo presses – electromechanical joining systems offer maximum energy efficiency, reduce CO2 emissions and finally cut operating costs significantly (3R-CTN)

Relatori:
Norbert Baeuml, Head of Business Field Joining Systems
Alexander Mueller, Product Manager NC Joining Systems
Registrazione: 08/10/2020
EN
EN
25 min
vExpo 2020 – How to build an artificial intelligence solution for test data using Kistler and Monolith

Dr. Joël Henry, Principal Engineer at Monolith AI introduces the platform and explains how AI can be used for virtual experiments by presenting various use cases.

Relatori:
Dr. Joël Henry, Principal Engineer, Monolith AI
Registrazione: 24/09/2020
EN
EN
60 min
Multicomponent force measurement from Kistler for space applications – practical aspects (Session 1)

We invite you to join our webinar to learn more about multicomponent force measurement for space applications with emphasis on practical aspects. 
As industry insiders, we focus on developing reliable and precise solutions for space applications. We put theory into practice as we work in partnership with renowned aerospace companies. In this online session, we will gladly share some of our accumulated hands-on experience with you to increase your awareness.

Application Engineer Bill Zwolinski will begin this webinar by exploring PE theory, followed by an overview of measuring chains. He will go on to consider practical aspects of force/moment measurement such as mounting, installation and checkout. You will also gain insights into Kistler specialties such as instrumentation for exported force and torque (EFT) measurement, force-limited vibration testing (FLVT)and thrust stand measurements. Then we will turn to you to ask questions to wrap up the webinar

Relatori:
Bill Zwolinski, Application Engineer
Registrazione: 04/09/2020
EN
EN
60 min
Weigh In Motion (WIM) systems for traffic data collection – Premiere of new KiTraffic Digital

Get to know why KiTraffic Digital takes Weigh In Motion to the next level and what makes it so special. Be the first to experience the results of first KiTraffic Digital installations. 

 

Relatori:
Lukas Koch, Head of Road & Traffic
Christoph Klauser, Product Manager Road & Traffic
Registrazione: 12/08/2020
EN
EN
60 min
Advanced vehicle dynamics and durability with Kistler testing solutions

The market is expanding with new applications such as CO2 emissions, ADAS and driverless testing. Kistler provides the entire solution.

With this webinar, Kistler experts will familiarize the testing process and highlight the required technology for various applications with with case-by-case examples.

Relatori:
Martin Degen, Business Driver Vehicle D&D
Igor Fast, Application Specialist
Yves Behr, Application Specialist
Eric Petersen, Sales Manager - Vehicle Dynamics & Durability
Mike Rihl, Vehicle Dynamics and Durability Sales and Applications Engineer
Registrazione: 28/07/2020
EN
EN
120 min
Safety technology of joining systems from Kistler – how to set them up and gain the best (Session 5)

This webinar is an online training on how to perfectly manage a joining system from Kistler controlled by a maXYmos NC. All topics cover the complete range of features and functionalities of the system.

Session5: Safety technology – determine performance level, IndraDrive C, IndraDrive Cs, JCC: Joining Competence Center – concept, manual workstation for trial, Q&A

Relatori:
Giuseppe La Macchia, Sales Engineer & Application Specialist
Peter Balzer, Application Specialist NC Joining Systems
Registrazione: 23/07/2020
EN
EN
120 min
External sensor for joining systems from Kistler – how to set it up and gain the best (Session 4)

This webinar is an online training on how to perfectly manage a joining system from Kistler controlled by a maXYmos NC. All topics cover the complete range of features and functionalities of the system.

Session 4: External sensor – channel X, channel Y, service, data export – standard protocols, Q-DAS, QDA9, IPM, software – maXYmos offline tools, Windows software maXYmos PC, Q&A

Relatori:
Giuseppe La Macchia, Sales Engineer & Application Specialist
Peter Balzer, Application Specialist NC Joining Systems
Registrazione: 21/07/2020
EN
EN
120 min
Evaluation objects of joining systems from Kistler – how to set them up and gain the best (Session 3)

This webinar is an online training on how to perfectly manage a joining system from Kistler controlled by a maXYmos NC. All topics cover the complete range of features and functionalities of the system.

Session 3: Evaluation objects – UNI-BOX, ENVELOPE, GET-REF, etc., advanced configuration – reference XY, HYSTERESIS, catch zone, Q&A

Relatori:
Giuseppe La Macchia, Sales Engineer & Application Specialist
Peter Balzer, Application Specialist NC Joining Systems
Registrazione: 16/07/2020
EN
EN
120 min
Sequence editor of joining systems from Kistler – how to set it up and gain the best (Session 2)

This webinar is an online training on how to perfectly manage a joining system from Kistler controlled by a maXYmos NC. All topics cover the complete range of features and functionalities of the system.

Session 2: Sequence editor – program parametrization, Q&A

Relatori:
Giuseppe La Macchia, Sales Engineer & Application Specialist
Peter Balzer, Application Specialist NC Joining Systems
Registrazione: 15/07/2020
EN
EN
90 min
The right way to use Big Test Data (R&D)

As a leading system provider of measurement technology solutions, Kistler supplies high-precision sensors and reliable data acquisition systems.
Now, the portfolio has been expanded with the addition of customer centric services and comprehensive analytical software for complex test applications.

Kistler offers its customers the entire measuring chain for vehicle development – from individual sensors to software systems that can evaluate vast quantities of data.

These intelligent, complete solutions from one single source help to make vehicles safer and more robust while boosting performance and efficiency.

Relatori:
Enrico Ferrentino, Sales Engineer ART
Sebastian Keimer, Business Driver Big Measurement Data
Registrazione: 14/07/2020
EN
EN
120 min
System overview of joining systems from Kistler – how to set them up and gain the best (Session 1)

This webinar is a FREE of charge online training on how to perfectly manage a joining system from Kistler controlled by maXYmos NC.
All topics cover the complete range of features and functionalities of the system. You can select the right sessions for your need or attend all sessions to achieve the fullest advantage.

In this webinar you will learn:

  • Setup the maXYmos NC
  • Parametrize the sequenze using the sequence editor
  • Choose the right evaluation object for the most efficient process evaluation strategy
  • When and how to use an external sensor
  • Process data export: setup and formats
  • Offline tools: utility features
  • Joining systems’ safety features and compliance
  • JCC: Joining Competence Center, the right support from early stage of design
Relatori:
Giuseppe La Macchia, Sales Engineer & Application Specialist
Peter Balzer, Application Specialist NC Joining Systems
Registrazione: 02/07/2020
EN
EN
60 min
Advanced vehicle development with Kistler testing solutions

Market is growing in new applications like CO2 emission, ADAS and driverless testing, where complete application packages are required. Kistler can propose to accelerate the familiarization process with technologies and benefits of such applications showing its solutions and providing installation example.

Relatori:
Martin Degen, Business Driver Vehicle D&D
Andrea Saita, Sales Engineer
Igor Fast, Application Specialist
Yves Behr, Application Specialist
Olivier Chabut, Project Manager Vehicle D&D
Registrazione: 25/06/2020
EN
60 min
Biomechanics: Jump & neuromuscular coordination analyses with Noraxon & Kistler

Learn about the importance of using force plate technology to drive clinical and performance decision making, followed by a live demonstration of a jump analysis comparison in the myoRESEARCH software platform using Kistler force plates and Noraxon EMG.

Relatori:
Will Lehmann, Sales Representative Kistler
Zach Scarano, Noraxon
Registrazione: 23/06/2020
EN
EN
40 min
Biomechanics: Integrating Kistler force plate technology into Qualisys mocap systems

In this webinar, you'll get to know Kistler's full range of force plates, and you'll learn all about the advantages of piezo technology. You'll also gain an overview of motion capture technology from Qualisys – including QTM, the user-friendly mocap software. Experts from both companies join forces to demonstrate how Kistler force plates are integrated into QTM.

Relatori:
Dominik Jenni, Product Manager Biomechanics Kistler
Katharina Buechli, Head of SBF Biomechanics Kistler
Katarina Hjältman, Support Engineer Qualisys
Johannes Sverker, Team Lead Support Qualisys
Registrazione: 09/06/2020
EN
EN
59 min
Calibration Fundamentals

Calibration is the basis for precise measurements with every measurement equipment. This webinar explains the added value provided by periodic calibrations. It is crucial to have a good understanding of the calibration topic to first obtain correct measurement results and handle your devices correctly and second fulfill the normative requirements by norms such as the ISO9001 or the IATF16949.

Relatori:
Peter Jäger, Service Operations Manager
Registrazione: 09/06/2020
EN
14 min
Weigh In Motion: Influences of Road Properties on WIM

Road properties have a substantial influence on WIM measurements. This webinar explains the causes of measuring error and how Kistler provides a service to measure and analyze them.

Relatori:
Fabian Koke, Sales Support Road & Traffic
Registrazione: 09/06/2020
EN
30 min
Weigh In Motion: Periodic WIM site maintenance

WIM site maintenance and assessment has a great influence on measurement accuracy, sensor lifetime and total costs of ownership. This webinar explains measuring methods, assessment procedures and remedies.

Relatori:
Petr Sevcik, Service Engineer Road & Traffic
Registrazione: 29/05/2020
IT
IT
60 min
”maXYmizzare” efficienza e qualità con il controllo integrato della produzione

Focus su alcune delle soluzioni Kistler che rendono il processo di assemblaggio trasparente.

II valori misurati e valutati sono utili non solo a migliorare le fasi di produzione, ma l’intero processo per ottenere massima affidabilità, elevati standard qualitativi e costi ottimizzati.

In questa edizione parleremo di:

  • Joining Systems – Servo Presse Elettromeccaniche: aumentare la produttività e abbassare i costi
  • maXYmos – valutiamo il processo: stessa filosofia, compiti diversi
  • Smart Connectivity – digitalizzazione e connettività, da IIoT a OPCUA
Relatori:
Giuseppe La Macchia, Sales Eng. & Appl. Spec. IPC Div
Registrazione: 17/04/2020
EN
EN
40 min
Accelerometers: Specifications and datasheets

This webinar provides details on technical specifications and standards of accelerometers and helps to better understand datasheets. The main focus lays on sensor sensitivity, measuring ranges, mounted resonance frequency, resolution and noise as well as linearity. 

More information on Kistler’s acceleration portfolio.

Relatori:
Marine Dumont, Business Development Manager Test & Measurement
Registrazione: 20/05/2020
EN
EN
28 min
Cutting Force: Milling

Milling operation is one of the most important manufacturing methods where complex shapes and geometries can be produced. Due to the high dynamics of the cutting forces, it is important to measure, understand and optimize machine and process settings through force measurement. This webinar explains how to build your own monitoring system with dynamometers from Kistler and how to control the milling processes through force measurement and advanced NC programming.

Relatori:
PhD Bülent Tasdelen, Business Development Manager
Registrazione: 18/05/2020
EN
EN
36 min
Weigh In Motion: Challenges of High Speed Direct Enforcement

Overview of weight direct enforcement using high-speed WIM systems. Best practices and experience from countries where it is operational. Regulatory framework and challenges of implementation.

Relatori:
Tomas Pospisek, Global Market Development Manager Road & Traffic
Registrazione: 18/05/2020
EN
EN
26 min
Weigh In Motion: Improve traffic data with KiTraffic Statistics

Vehicle weight is an essential parameter of traffic data. The new KiTraffic Statistics WIM system provides weight, volume, speed and classification data of live traffic at an outstanding price / performance ratio. Learn how it helps to increase remaining lifetime of bridges and to improve decision making in road management.

Relatori:
Christoph Klauser, Product Manager Road & Traffic
Registrazione: 11/05/2020
EN
EN
41 min
Biomechanics: Overview of force plate systems and introduction to data acquisition from Kistler

In this webinar, we will present an overview of our force plate systems and show you the range of hardware and software packages that Kistler offers. You'll also learn how to use our MARS software to perform a variety of functions including analysis of countermovement jumps and squat jumps. We will present the complete workflow: from collecting and managing your data through to visualizing the results in reports. And as a participant in our webinar, you will have free access to tutorial videos – available 24/7, so you can learn more about using our Kistler MARS software whenever you want after the online session ends.

Relatori:
Florian Laborde, Business Driver and Dominik Jenni, Product Manager
Registrazione: 11/05/2020
EN
EN
38 min
Biomechanics: Practical cases showing how force plate systems are used in strength and conditioning training

In this webinar William Lindholm will describe how to interpret measurement data as he guides you through the various application scenarios offered by the range of modules and tests available in Kistler MARS. After this webinar, you will understand how you can use performance monitoring as the key to optimizing your athletes' strength and conditioning training programs. William Lindholm, currently Strength and Conditioning Coach at the Washington Nationals, has over five years' experience of using force plates to assess athletes in different sports.

Relatori:
William Lehmann, Sales North America
William Lindholm, Strength and Conditioning Coach at Washington Nationals
Registrazione: 23/04/2020
EN
EN
29 min
Cutting Force: Turning

Turning definitely is one of the most important machining operations. In order to evaluate and optimize these processes through tool wear cutting forces have to be measured. Learn in this webinar what forces are being applied to the workpiece and how the forces can be measured.

Relatori:
Bülent Tasdelen, Business Development Manager
Registrazione: 17/04/2020
EN
EN
49 min
Accelerometers: Basics on vibration shock & acoustic emission measurement

This webinar explains the different principles of acceleration measurements such as laser interferometer, fringe-counting method and spring-mass systems - with a focus on the latter principle. It features details on various sensor technologies for vibration measurement (piezoelectric, IEPE, piezoresistive, MEMS and more) and gives an indication on when to use which technology. 

More information on Kistler’s acceleration portfolio.

Relatori:
Marine Dumont, Business Development Manager Test & Measurement
Registrazione: 17/04/2020
EN
EN
29 min
Accelerometers: Mounting considerations

There are many possibilities when it comes to accelerometer mounting methods. This webinar explains how to optimize your sensor mounting for the best frequency response and the best measurement. The following mounting methods are treated: probe, magnetic base, adhesive mounting (direct/via base) and stud mounting.

More information on Kistler’s acceleration portfolio.

Relatori:
Marine Dumont, Business Development Manager Test & Measurement
Registrazione: 17/04/2020
EN
EN
27 min
Accelerometers: Potential damages & trouble shooting

This webinar focuses on possible errors and damages that can happen when measuring with accelerometers and how to simply trouble-shoot those kind of issues. Mostly, damages are caused by thermal, mechanical or lateral impacts and aging.

More information on Kistler’s acceleration portfolio.

Relatori:
Marine Dumont, Business Development Manager Test & Measurement
Registrazione: 17/04/2020
EN
EN
17 min
Force: Piezo vs. Strain Gauge

This webinar provides a complete overview on when to use which force sensor technology. Strain gauge sensor are mainly used for static measurements and piezoelectric sensor for dynamic measurements. Besides this first  differentiation, there are many other aspects which should be taken into consideration. 

More information on the force sensor portfolio from Kistler.

Relatori:
Martin Betschart, Product Manager Force Sensors
Registrazione: 17/04/2020
EN
EN
22 min
Force: Specifications of Piezoelectric 1-Component Force Sensors

1-component force sensors are used in many different applications. Pre-tension, pre-load as well as calibrated and nominal force range are important terms which are going to be explained in that webinar. Moreover, the webinar treats the influence of negative stress being generated by bending moments and gives indications on how to choose the right pre-tension. 

More information on the force sensor portfolio from Kistler.

Relatori:
Martin Betschart, Product Manager Force Sensors
Registrazione: 17/04/2020
EN
EN
13 min
Pressure: Introducing Piezoelectric Pressure Sensors

What sensor technology to use to measure dynamic pressure or pressure pulsations? If this questions is relevant to you, this webinar is a must watch. It provides information on when and how to use piezoelectric pressure sensors and explains the most important specifications.

Relatori:
Ricardo Rodrigo, Product Manager Pressure Sensors
Registrazione: 17/04/2020
EN
EN
28 min
Signal Processing: Why and how to apply filters

A filter always cuts away a part of the measured signal. That’s why it is essential to implement the correct filters. Don’t miss this webinar in case you want to learn more on different filter types and how to apply them. Moreover, cut-off frequency, filter order & characteristics as well as frequency response are treated.

More information on Kistler’s signal conditioning portfolio.

Relatori:
Pascal Boltshauser, Product Manager Handheld Platform
Di più
Contatto
Max 25 MB