Solutions for industrial quality assurance as driver of growth

Winterthur, June 20, 2017 – The Kistler Group reports incoming orders with a total value of around 183 million US dollar by the end of May, an increase of 26% compared to the same period of the previous year after adjusting for currency effects. Quality assurance in digitized industrial production remains a focus topic. The inclusion of Kistler products in higher-level systems will make quality-relevant parameters easier to analyze and optimize in the future.

Strong demand from the international automotive industry

The strong growth of the Kistler Group compared to the same period of the preceding year is primarily due to strong demand from the automotive industry.

On the one hand, the American market with its new, emerging auto brands has posted strong demand. On the other, Kistler is benefiting from the development of capacity in the automotive production facilities in Asia and the European trend toward quality assurance, which are driving demand for our industrial production monitoring solutions.

Rolf Sonderegger, CEO Kistler Group

Industrial quality assurance starts with Kistler sensors…

Faulty parts which are to be installed in automobiles represent an enormous safety risk and force the automotive industry to make cost-intensive and image-damaging recall campaigns. For this reason, quality assurance integrated into the production process is of central importance, particularly for carmakers and their suppliers.

Kistler sensors are an important basis for a quality monitoring solution that offers far more than just precise measurement data. It also enables quality-relevant parameters to be controlled better and prevents faulty production.

… and includes the synchronization of all production data

After a pilot project of the Industrial Process Control (IPC) division for linking Kistler process data to an MES system (Manufacturing Execution System), it will be possible to easily incorporate more and more Kistler devices and systems into higher-level industrial production monitoring systems. The goals are continuous transparency and traceability within the production process.

"Our objective is the perfect synchronization of all production data. This will enable us to open up new possibilities for quality enhancement and thus cost reduction for our customers," Rolf Sonderegger explains the strategy.

In order to offer Kistler customers these extended quality assurance possibilities, Kistler will purchase know-how and technology and use it to extend its offering as a solution provider.

End-to-end quality assurance in industrial production

The switch and socket manufacturer Feller AG from Horgen, Zürich, uses Kistler technology for quality assurance. Quality control with Kistler low force sensors ensures that faulty parts are rejected from production at the earliest possible point in time.

For the market leader in the Swiss electrical installations sector, highly automated production with integrated quality assurance is a central precondition for even being able to produce in Switzerland. At a first glance, production costs may be lower in a low-wage country – but faulty parts could have fatal consequences for the entire installation. The declared goal of Feller AG is therefore to achieve just-in-time zero-defect production and thus lasting cost-optimization.

Find out more about end-to-end quality assurance in industrial production.

 

Media Contact
Alexandra Sasidharan-Scherrer
Corporate Communications
Tel.: +41 52 224 15 95
E-Mail: alexandra.sasidharan-scherrer@kistler.com

KIT PARA MEDIOS INFORMATIVOS

Kistler portrait with logo for a quick overview: Kistler Press Kit.zip

09/10/2017
Kistler's Type 5074A industrial charge amplifier breaks new ground in industrial charge amplifier technology
06/10/2017
Whether hybrid drives or electric vehicles: anyone who wants to make a change needs to measure and understand
27/09/2017
Our experts will present you Kistler measuring technologies for demanding space applications.
05/09/2017
At Fakuma 2017, we will demonstrate how you can benefit from new ComoNeo functionalities
31/08/2017
Kistler Group showcases the entire spectrum of its integrated quality assurance solutions
25/08/2017
Kistler Group took over near Karlsruhe-based Vester Elektronik GmbH on 25 August, a specialist in sensor...
11/08/2017
Jaguar Land Rover uses Kistler RoaDyn® Wheel Force Transducers for accurate tyre modelling
11/07/2017
Kistler is taking over IOS GmbH (Germany), provider of Manufacturing Execution Systems (MES).
06/07/2017
Tettnang-based firm eso GmbH was acquired by the Kistler Group on July 5.
20/06/2017
Perfect production data synchronization through direct MES system integration.
02/05/2017
Kistler presents innovative measurement equipment for demanding vehicle testing applications
25/04/2017
At Moulding Expo 2017, we will show how easy it is to install the measurement technology needed for quality...
12/04/2017
Kistler will be present at Control, the world's leading quality assurance trade fair.
12/04/2017
Advanced features for LabAmp family maximize flexibility for cutting force users.
11/04/2017
Measuring equipment for sophisticated T&M applications
01/02/2017
The Kistler Group is constantly growing and recruiting specialist staff worldwide.
17/01/2017
Olympic champion Anthony Ervin and Kistler create a Success Story together.
02/12/2016
Kistler seeks more than 40 specialists in what is likely Switzerland's largest job advertisement.
27/10/2016
At this year's SPS IPC Drives in Nuremberg Kistler will premiere laboratory systems to analyze bolted joints,...
21/10/2016
Kistler boosts the efficiency and reliability of large marine and stationary engines through monitoring and...
19/10/2016
Kistler is presenting the new versions of its ComoNeo and ComoDataCenter.
10/10/2016
Kistler is unveiling a new addition to its portfolio of electromechanical joining modules.
30/09/2016
The Kistler Group reported incoming orders worth CHF 233.3 million at the end of August 2016 and has therefore...
07/09/2016
At this year's K Trade Fair from 19 to 26 October in Düsseldorf, Kistler will be showcasing its latest new...
24/07/2016
Kistler will be showcasing its new NCFE and NCFR joining modules, together with the latest generation of...
12/07/2016
Kistler's Correvit® SFII sensor measures world record in 1.513 seconds
12/05/2016
Screw technology complements the range of applications.
27/04/2016
Following a long phase of planning, preparations, and conversion work, Kistler Instrumente GmbH has a new home...
12/02/2016
Kistler Lorch GmbH Honored for Outstanding Qualities as Employer
02/02/2016
The Kistler Group has overcome currency-related challenges at its Swiss site to achieve continued growth.
28/01/2016
Accurate Wheel Force Measurement with Minimum Configuration Effort
26/11/2015
Increased Flexibility for High-Speed Combustion Analysis
02/11/2015
New Piezoresistive Sensor with Temperature Probe and Integrated Signal Conditioning.
27/10/2015
Kistler Provides Maximum Flexibility for Product Testing and Development
16/10/2015
Kistler's NCFR Joining Module honored in the handling and assembly category
05/10/2015
Setting the Standard for 100% Control of Linear Joining Processes with Partial Rotation
18/09/2015
Kistler Group: safeguarding the firm's competitive edge.
15/09/2015
Quick evaluation of performance and force with Kistler MARS 2.1.
03/09/2015
Major update for Kistler’s mobile engine indication system.
01/09/2015
Setting New Standards in Automated Process Monitoring for Injection Molding.
25/08/2015
Kistler Showcases Three Latest Product Innovations at Motek 2015
29/06/2015
Kistler Automotive GmbH honored as one of Germany's most innovative companies
26/06/2015
Kistler honored with ASCO Award Gold for best corporate transformation in Switzerland.
26/06/2015
Kistler's software for force plates offers a host of new features for performance diagnostics in sports and...