Kistler Correvit® SFII Sensor Measures World Record for Acceleration

In June 2016, the Academic Motorsports Club (AMZ) broke the official Guinness World Record for the fastest 0-100 km/h acceleration of an electric car. AMZ was founded in 2006 by students of the Swiss Federal Institute of Technology (ETH Zurich). A Kistler Correvit® SFII type sensor measured the magical 100 km/h milestone.

From 0-100 km/h in Under Two Seconds

1.513 seconds. Never before had an electric race car accelerated from 0 to 100 km/h at such a pace. The previous world record of 1.779 seconds—set by a Formula Student racing team from the University of Stuttgart—stood until June 22, 2016. The record was shattered on the very first attempt on a 120-meter course set up at the military airport in Dübendorf. The Swiss electric racing car “Grimsel” achieved the 100 km/h mark in just 30 meters. By recording the magical milestone, the Kistler Correvit® SFII sensor played a key part in setting the world record.

Reliable Partner from the Outset

In a world record attempt—where victory or defeat is determined in a few thousands of a second—precise measurement data take on critical importance. With over 50 years’ experience in extreme-range measurements, Kistler has always been a solid partner of AMZ. 

Kistler has lent us its support for four seasons now and has become an integral part of our success. When we started planning for the world record, it was clear from the outset that we would again rely on the Correvit® SFII sensor to ensure efficient control and, of course, record the official time measurement. We were delighted when Kistler assured us its full support."

Jonas Abeken, vice president of AMZ

Pioneer Spirit Lives On

It takes courage, a desire for innovation, and the will to push past boundaries to undertake projects such as breaking the world record for the fastest 0-100 km/h acceleration of an electric car. As a global driver of innovation headquartered in Switzerland, Kistler is particularly pleased that the Swiss pioneer spirit lives on and that Kistler can play an active part in ensuring it will continue to thrive. Kistler employs its measurement solutions to promote progress in research and development and establish the foundation for tomorrow’s mobility. To understand how fast 1.513 seconds really is, take a look at this video on AMZ’s world record. In step with the megatrends of mobility, emissions reduction, quality control, and lightweight design, our highly skilled workforce is pushing the limits of what’s possible and finding answers to tomorrow’s questions—in partnership with and in service of our customers.
Are you ready to help shape the future? Then join our team.

world-record.jpg

The AMZ driver during the world record

correvit-sfII.jpg

Correvit® SFII: 2-Axis Optical Sensors

02/07/2021
Kistler supplies Airbus’ Zephyr with measurement technology for ground and flight testing
Two IEPE accelerometers deliver key data for propulsion validation and optimization of flight characteristics even in the stratosphere
22/06/2021
Kistler supports development of innovative space technology test equipment at CSEM
Capturing micro-vibrations with a dynamometer leads to improved satellite technology
02/06/2021
How Zinkteknik achieved zero-defect production with Kistler test automation systems
Zero defect despite high volumes: this is the way quality assurance with Kistler test automation systems works for zinc die casting parts
26/04/2021
Co-creation by SBB and Kistler will optimize train maintenance in eastern Switzerland
A digitally driven brake force measurement system makes the life of service technicians for train maintenance much easier
13/04/2021
How advanced pressure sensors from Kistler help researchers to understand sloshing
Inside "The Atmosphere" at MARIN, 100 of our pressure sensors capture wave impacts under varying environmental conditions
22/03/2021
Measurement equipment from Kistler plays its part in the development of ultramodern gas turbines
How MAN Energy Solutions is using sensors from Kistler to make its gas turbines fit for the future
08/02/2021
Shanghai University of Sport chooses force plates from Kistler for pole vault research
Measurement technology dedicated to the discipline and biomechanics of pole vault enables high performances
05/10/2020
Kistler enables digital measuring chains for advanced vehicle test stands
How does a digital measuring chain for piezoelectric sensors work as part of a complex vehicle test stand?
18/09/2020
Ohio authorities rely on Weigh In Motion technology from Kistler
Convincing test results: The Ohio Department of Transportation goes on to apply Lineas from Kistler for traffic monitoring.
20/08/2020
Tapping into success
Precision is the key to top performance: how measurement technology from Kistler supports the development team at EMUGE-FRANKEN
22/07/2020
Far eastern perfection
Quality assurance solutions by Kistler like ComoNeo ensure highest accuracy at TSP Precision Tooling in Shanghai.
09/06/2020
Revolutionize turning with dynamometer from Kistler
Kistler supports Ceratizit in the development of HDT. This enables complex geometries to be produced with just one tool.
15/11/2019
How Polyfab trims its injection molding production to the highest quality
Process monitoring systems and cavity pressure sensors from Kistler help to reduce the amount of scrap drastically
23/10/2019
Festool hones competitive edge with measurement technology from Kistler
How measurement technology from Kistler contributes toward boosting high-end powertools' quality
15/08/2019
Reyher reliably controls threaded joints thanks to an universal fastener test stand
How the ANALYSE system from Kistler is enhancing safety and transparency in the field of fastening technology
17/07/2019
Effective charging solutions for overloaded vehicles
Turkey opts for weight enforcement with WIM technology from Kistler
24/06/2019
Kistler supports Airbus Defence & Space with developing the service module for the Orion spacecraft
For the next manned flight to the moon: safety that can be measured
20/06/2019
A torque sensor guarantees the functionality of mixing nozzles at Jonas & Redmann
Segregation of good and bad parts every 1.5 seconds: process monitoring with Kistler enables high quality for over 5 million parts per year.
14/05/2019
Two-stage process monitoring for excellent plastics from Tessy
In order to achieve excellent quality for its components and medical devices, Tessy Plastics chose sensors and solutions from Kistler.
18/04/2019
The dimensions are exactly right
A renowned manufacturer of electrical appliances trusts testing and sorting systems by Vester to improve its quality.
02/04/2019
Efficient diagnostics: accurate jump force measurements are the key
NFL's Jaguars boost their fitness levels with Kistler.
25/03/2019
Schurter backs on Kistler's process monitoring for highly automated electronics production
By using process monitoring from Kistler, not only the assembly of electric fuses is validated, but even the function of the sensors itself.
18/03/2019
SCL Tigers in great shape through targeted training
How to determine the fitness level of an athlete efficiently? A practical report on the Quattro Jump force plate system from Kistler.
17/12/2018
1500 Lineas sensors for Hungary's nationwide Weigh In Motion network
Thanks to precise Weigh in Motion technology from Kistler, Hungary's roads are sustainably protected against overloaded vehicles.
27/11/2018
Bang&Clean puts its trust in Kistler's blast measurement expertise
Bang&Clean relies on Kistler's precise measurement of ignition processes and pressure wave propagation
10/10/2018
How Sartorius meets owing to the process monitoring system ComoNeo stringent quality requirements
Sartorius applies the process monitoring system ComoNeo from Kistler and thereby increases the process quality during injection molding
08/10/2018
The Technical University (TU) Dortmund tests new MicroDyn dynamometer from Kistler
The Dortmund Technical University tests the new MicroDyn 9109AA cutting force dynamometer from Kistler and breaks new ground for developing its micromachining processes.
31/08/2018
ZF operates with a software-controlled fastener test bench from Kistler
The ZF company operates a software-controlled Kistler fastener test bench with an integrated vibration unit.
14/08/2018
BIG Daishowa relies on cutting force measurement from Kistler for superior tool development
BIG Daishowa, headquartered in Osaka, Japan, is one of the leading producers of tool holders for the machining industry. Each year the company produces over half a million collet chucks. Their products are developed using, among other resources, Kistler’s cutting force measuring device.
16/07/2018
Liebherr: The nuts and bolts of success
Enhanced quality and efficiency in mobile crane manufacture – thanks to the test stand for torque tools by Kistler
11/04/2018
World’s first crash wall for high-speed trains
The world’s largest provider of rail transport technology relies on Kistler’s measurement expertise. Thanks to the only crash wall of its kind in the world, the impact forces of the trains and their components can be precisely measured and analyzed.
14/11/2017
High-precision measurement data for the optimization of cooling lubricants
In the development of cooling lubricants, Blaser Swisslube relies on Kistler's measurement expertise.
11/08/2017
Applus IDIADA invests in a digital future
Applus IDIADA relies on DTI in-dummy technology from Kistler for Test Device for Human Occupant Restraint (THOR).
04/01/2017
Kistler Helps Increase the Chance of Survival in Crashes
Road safety is a central topic in vehicle development. Through accurate measurements, Kistler helps increase the chance of survival in crashes.
22/12/2016
System Technology from Kistler as the Basis for Integrated Vehicle Tests
Kistler makes progress in vehicle development possible
22/12/2016
Kistler Correvit® SFII Sensor Measures World Record for Acceleration
Kistler Sensor Correvit® SFII measures world record
20/12/2016
In the Pole Position with Precision Sensors from Kistler
Kistler sensors deliver a maximum in data quality under any conditions.
07/11/2016
Sensor Monitoring Over 6.4 Billion Kilometers
Kistler pressure sensors enabled the Rosetta space probe to fly for 6.4 billion kilometers.
05/10/2016
Kistler on the Campus of FC Basel 1893
Since the end of 2015 FC Basel is using Kistler force plates to reduce the dropout of young talents.
17/08/2016
Kistler’s Performance Analysis System Prepares Swimmers for the Rio Olympics
Kistler makes the difference in the crucial sports moments with its Performance Analysis System for Swimming.
19/02/2016
Flexible Solutions for Highest Precision at the Pump Test Bench
Determination of Pump Efficiency with Kistler KiTorq Measuring Flange System
04/11/2015
Easily Integrate Piezoelectric Signals into Your Own Applications
Piezoelectric Measurements with CompactRIO™
15/06/2015
Acute Sensitivity at the Test System with Kistler Force-Displacement Monitoring
Measurement Solutions for Automotive Test Systems
08/05/2015
Zero defects are the basis for lean production
Quality Assurance in the Automotive Industry
02/03/2015
Spick and span with 100 % quality
How Brose improves the quality of its two-component production and automatically separates defective parts
02/12/2014
Kistler Acquisitions: Win-Win for All Concerned
The Kistler Group pursues a growth policy that is both ambitious and sustainable – and strategic acquisitions are one of its core elements. ‘Strategic’ means that Kistler deliberately selects companies which can achieve more together with Kistler than they ever could by continuing alone. The takeover of Dr. Staiger Mohilo & Co. GmbH in 2006 enabled Kistler to grow jointly with the acquired company...
02/12/2014
4,000,000,000 Miles on Just One Tank of Fuel
After a ten-year voyage, the Rosetta space probe's Philae landing module finally touched down on the surface of comet ‘Chury’.
23/08/2011
Higher Quality and Better Utilization
HEWI and its Customers Benefit from Cavity Pressure Technology
15/02/2011
Balda Medical Monitors Cavity Pressure
End-to-end process monitoring for critical medical moldings
07/02/2011
Sensors stop cost spiral
Cavity pressure measurement eliminates short shots at Fischer GmbH & Co KG of Sinsheim/Germany
Contacto
Max 25 MB