Triaxial load cell, piezoelectric force transducer Fx, Fy, Fz (Fz to ±30 kN / ±6.74 klbf) / 9347C

Kistler offers force sensors, force links and dynamometers for NVH testing by application of Transfer Path Analysis (TPA).
9347C
18007696
  • Triaxial piezoelectric load cell with measuring ranges Fx, Fy: -15 ... 15 kN and Fz: -30 ... 30 kN (±3.37 klbf / ±6.74 klbf)
  • Preloaded, calibrated and ready to measure
  • Nominal sensitivity Fz: -3.7 pC/N
  • Connection: V3 neg.
On request
On request
Preloaded sensorYesMaximum measuring range30 kNThreshold≤0.01 NOutput signal typeCharge (Piezoelectric, PE)Insulation resistance>10^13 ΩApplicationsNVH testing, eVTOL / UAV / drone testing, Space payload testingCalibrated range Fz0 … 30 kNRange Fz-30 … 30 kNOverload Fx, Fy, Fz≤10%Linearity, each axis≤±0.5 %FSONatural frequency fn(y)≈3.6 kHzAxial stiffness2.749 kN/μmShear stiffness0.89 kN/μmGround insulated>10^8 ΩPermissible moment loading Mz-150 … 150 N·mTorsion stiffness4834 N·m/°
Measuring range-30 … 30 kNForce sensor typeTriaxial force sensorOperating temperature range-40 … 120 °CDegree of protection EN 60529IP68Weight1.0 kgCalibrated range Fx, Fy0 … 5 kNRange Fx, Fy-15 … 15 kNCrosstalk Fx <-> Fy≤±2%Sensitivity Fx, Fy≈–8 pC/NNatural frequency fn(x)≈3.6 kHzNatural frequency fn(z)≈10 kHzBending stiffness4572 N·m/°Capacitance, each channel70 pFPermissible moment loading Mx, My-150 … 150 N·mConnecting plugV3 neg.
This triaxial load cell is a piezoelectric force transducer for the exact measurement of all forces on the three orthogonal components acting in an arbitrary direction. Independent of the point of force application, the load cells with the installed triaxial force transducers of the 90x7 family measure all three components of the applied force in highest resolution. The three axis load cells in the 93x7 product family are optimally preloaded, calibrated and immediately ready to measure. The triaxial load cells are mounted under preload between two plates and measure both tensile and compression forces in all directions. Based on the piezoelectric principle, a force produces a proportional electric charge. This is conducted via an electrode to the appropriate connector. The simple and vibration-resistant design of the force transducers is very rigid resulting in a high natural frequency, which is a requirement for highly dynamic force measurements. The 3-pole connector V3 neg. (design protected) is provided with a positioning aid. This guarantees accurate assignment and centering of the connector pins and sockets before connection. The plug connection is protected against rotation. After correct installation, the load cell is ready for use without recalibration. Triaxial force transducers allow simple, direct and very precise measurements.
Advertisements
English
pdf
For access, please click here to log in. You will be redirected automatically.
Data sheet
English
pdf
For access, please click here to log in. You will be redirected automatically.
Handout
English
pdf
For access, please click here to log in. You will be redirected automatically.
Manual
Triaxial load cell
English
pdf
For access, please click here to log in. You will be redirected automatically.
38 results
Accessory Type
Connecting cables (TPC black) for triaxial force sensors with V3 neg. connector
1698-3TPC
1698AN4sp
Price On request Availability
On request
Connecting cable for triaxial force sensors, V3 90°, 3 x KIAG 10-32 pos., exit angle 270°, down
1698AN3sp
Price On request Availability
On request
Connecting cable for triaxial force sensors, V3 90°, 3 x KIAG 10-32 pos., exit angle 180°, left