Industrial Piezotron (IEPE) couplers with external supply, 1-channel / 5127B

This 1-channel industrial Piezotron (IEPE) coupler is powered by an external DC voltage source and is suitable for the operation of Piezotron (IEPE) sensors.

5127B

This 1-channel industrial Piezotron (IEPE) coupler is powered by an external DC voltage source and is suitable for the operation of Piezotron (IEPE) sensors.
Main features / advantages
  • Powered by an external DC voltage source
  • Option: RMS output and limit switch
  • Plug-in type filters
  • Robust case and vibration-resistant construction
  • IP65 protection
The Type 5127B single-channel Piezotron (IEPE) coupler is suited for low-impedance sensors with integrated electronics (Piezotron (IEPE) sensors). The gain can be set with a jumper to either 1x or 10x. The amplifier has two series-connected second-order filters, designed as plug-in elements. The type of filter (high-pass or low-pass) as well as the frequency limit are selectable. A bandpass filter is obtained by the series connection of one high-pass and one low-pass filter. The time constant of the optional RMS converter can be selected. The limit switch is set with a potentiometer. The switching threshold set point can be monitored at the “Limit” output with a digital volt meter or an oscilloscope. The output of the limit switch is electrically isolated by an optocoupler. The following output signals are present at the 8-pole round connector: two analog output signals (Out (Filter) and Out (RMS)) and a digital output signal (Limit Switch).
Data sheet
English
pdf
Please click here to log in to myKistler and you will be redirected.
English
pdf
Please click here to log in to myKistler and you will be redirected.
Manual
Piezotron coupler
English
pdf
Please click here to log in to myKistler and you will be redirected.