Products for transportation

Measurement technology for traffic and transportation sector from Kistler helps improves road and rail safety.

The ES 8.0 modular speed enforcement system for efficient vehicle speed measurement comes with an one-sided sensor and up to two separate photo units.

Speed enforcement system ES 8.0, mobile equipment: sensor, cameras, WiFi, tablet

Speed enforcement system ES 8.0, mobile equipment: sensor, cameras, WiFi, tablet

SE8.0 Sensoreinheit

Speed enforcement system ES 8.0, single-sided sensor for universal speed measurement

Speed enforcement system ES 8.0, WiFi router WP 2.0 in transport case

The in-vehicle installation of the ES 8.0 speed enforcement system is available in three levels: rear box, integrated measuring station and rolling office.

Speed enforcement system ES 8.0, components for in-vehicle installation

Speed enforcement system ES 8.0, components for in-vehicle installation

In Car Installation

ES-KFZ-T Bodenplatte

Speed enforcement system ES 8.0, in-vehicle installation (van), base plate

ES-KFZ-T Schubladenschrank

Speed enforcement system ES 8.0, in-vehicle installation (van), drawer cabinet

The ES 8.0 mobile universal speed enforcement system can also be used for stationary surveillance.

Speed enforcement system ES 8.0, components for stationary measurements

Speed enforcement system ES 8.0, components for stationary measurements

Stationary Speed enforcement

Speed enforcement system ES 8.0, stationary use, protective housing for camera 1 and flash

Speed enforcement system ES 8.0, stationary use, sensor housing

The modern, adjustable flash device BE 2.0 and the additional flash BE 1.3 allow for reliable identification of driver and number plate.

Speed enforcement system ES 8.0, flash units BE 2.0 and BE 1.3

Speed enforcement system ES 8.0, flash units BE 2.0 and BE 1.3

BE 2.0 & BE 1.3

Speed enforcement system ES 8.0, additional flash unit BE1.3

Speed enforcement system ES 8.0, xenon flash unit BE2.0 with adjustable flash edge

KiTraffic Digital from Kistler is the most accurate Weigh In Motion (WIM) system for direct weight and tire enforcement.

Weigh In Motion (WIM) system KiTraffic Digital

Weigh In Motion (WIM) system KiTraffic Digital

Weigh In Motion (WIM) system KiTraffic Digital

KiTraffic Basic is an advanced Weigh In Motion system for pre-selecting overloaded vehicles and weight enforcement, providing accurate weight measurements.

Weigh In Motion (WIM) system KiTraffic Basic

Weigh In Motion (WIM) system KiTraffic Basic

Weigh In Motion (WIM) system KiTraffic Basic

KiTraffic Compact is a cost-efficient Weigh In Motion system designed for traffic data collection, which delivers vehicle weight data and detailed traffic insights.

Weigh In Motion (WIM) system KiTraffic Compact

Weigh In Motion (WIM) system KiTraffic Compact

Weigh In Motion (WIM) system KiTraffic Compact

These robust charge amplifiers are specifically designed for Lineas WIM sensors with charge output (Type 9195GC). They provide well-conditioned voltage output signals for further processing by a data acquisition system.

Charge amplifiers for Lineas Weigh In Motion (WIM) sensors

Charge amplifiers for Lineas Weigh In Motion (WIM) sensors

Charge amplifier for Lineas WIM sensors, 4 channels, ±60000 pC

Charge amplifier for Lineas WIM sensors, 8 channels, ±60000 pC

The permanently installed Lineas quartz sensors measure wheel and axle loads to determine the gross vehicle weight under rolling traffic conditions.

Lineas quartz sensors for Weigh In Motion (WIM)

Lineas quartz sensors for Weigh In Motion (WIM)

Lineas quartz sensor for Weigh In Motion (WIM), sensor length 1.5 m, cable length 40 m

Lineas quartz sensor for Weigh In Motion (WIM), sensor length 1.5 m, cable length 100 m

The permanently installed Lineas Compact quartz sensors measure wheel and axle loads to determine the gross vehicle weight under rolling traffic conditions.

Lineas Compact quartz sensors for Weigh In Motion (WIM)

Lineas Compact quartz sensors for Weigh In Motion (WIM)

Lineas Compact quartz sensor for Weigh In Motion (WIM), sensor length 1.75 m, cable length 40 m

Lineas Compact quartz sensor for Weigh In Motion (WIM), sensor length 1.75 m, cable length 100 m