Glosario

A

Acelerómetro de alta temperatura

High temperature accelerometers allow for precise monitoring of pressure pulsations and fluctuations in rocket engines.

Amplificadores de carga

Charge amplifiers vary by measurement type, frequency range, number of measuring channels, measuring range and type of data use.

Análisis modal

The modal analyses of the mechanical structures of the Beluga XL were performed in as part of an extensive GVT by the DLR in Göttingen.

Ángulo de caída

Dynamic camber angle is measured relative to ground by means of a precise optical sensor system (DCA) from Kistler.

C

Cadena de transmisión

A powertrain is a complex system consisting of various components that are optimized and coordinated with one another using measurement technology.

Calibración del sensor

In the accredited calibration laboratory: a precision calibrator is used to calibrate a charge amplifier.

Calibración del sensor de presión

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

D

DTI (Digital Transducer Interface)

DTI is an advanced single-cable technology for the efficient use of complex measurement technology in automotive engineering.

E

Efecto piezoeléctrico

Quartz crystals and the piezoelectric effect

Efecto piezorresistivo

Silicon chip with four resistors; pressure distribution on a silicon semiconductor.

Evaluación de datos de medición/análisis de datos de medición en investigación y desarrollo

Kistler assists its customers with extensive all-round support and measuring solutions for universal use in demanding vehicle tests.

Extensómetro

Strain gauges: the electrical resistance changes proportionally to the strain exerted on it when stretched or compressed.

F

Fuerza de corte

High cutting forces occur during of chip formation, e.g. during a turning operation, as well as high forces and heat.

Fuerza de reacción del suelo

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Fuerzas de corte en operaciones de giro

This graphic illustrates the orthogonal forces during turning, plus the vectoral sum force and the resultant force.

G

Gestión de datos de medición

MaDaM is a measurement data management system that is one component of a complete tool chain covering the entire workflow

Grandes cantidades de datos de prueba

What does the term Big Test Data mean? Learn more here…

H

Hexápodo o sistema de posicionamiento 6 ejes

Exact calibration of a force sensor with the help of a hexapod.

I

IEPE (Integrated Electronics Piezo-Electric)

Integrated Electronics Piezo-Electric IEPE

Incertidumbre de medición

[object Object]

M

Medición de fuerza-desplazamiento

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Medición de fuerzas de corte en operaciones de fresado

Rotating dynamometers (RCD) to measure cutting forces directly on the cutting edge

Medición de fuerzas de corte en operaciones de perforación

Cutting force measurement during a drilling operation, using a rotating dynamometer (RCD) from Kistler (9170A).

Medición de presión del cilindro

Cylinder pressure measurement inside the cylinder of a reciprocating piston combustion engine: the basis for cylinder pressure indication.

Métodos de medición de par

Torque sensors guarantee precise definition of the power and friction values of drives, transmissions and pumps.

Montaje/instalación de un acelerómetro

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

P

PiezoStar Crystal

PiezoStar crystals: they are used in sensors for measuring smallest forces and perform measurements at higher temperatures.

Plataforma de medición de fuerza

To record complex movement patterns, force plates are used in combination with video cameras or motion-capture systems.

Presión de cavidad

Cavity pressure in the injection molding process

Prueba de bataneo o buffeting

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Prueba de flameo

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Prueba de FLV o Force Limited Vibration Testing (FLVT)

For the FLV-test, numerous three-component force sensors are mounted on a base plate that is connected to the slip table.

S

Sensor de fuerza multicomponente

Multi-component force sensors measure dynamic forces and moments acting on aircraft wings in the wind tunnel.

Sensor de fuerza piezoeléctrico

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Sensor de presión de alta temperatura

Piezoelectric high temperature pressure sensors are capable of measuring pressures at temperatures of 700°C (1.300°F) and higher.

Sensor de presión piezoeléctrico

The illustration of a piezoelectric pressure sensor shows how the pressure is transformed to a proportional electric charge.

Sensor de presión piezoeléctrico: salida de carga (PE) frente a salida de voltaje (IEPE)

The list outlines when to apply piezoelectric pressure sensors with charge (PE) or with voltage output (IEPE).

Sensor de presión piezorresistivo

Piezoresistive pressure sensor based on silicon chip: a silicon chip senses the pressure via a membrane and silicone oil.

Sensores de fuerza - Transductores de fuerza

Force sensors and force transducers measure dynamic and quasistatic forces in industrial and laboratory applications.

Sensores de fuerza de galgas extensométricas

Strain gauge force sensors measure applied static and quasistatic tensile and compression forces.

Sensores de presión piezoeléctricos con salida de carga (PE) para medición de presión estática

Piezoelectric pressure sensors with charge output (PE) display a drift during static pressure measurement.

Sensores piezoeléctricos para la medición de presión dinámica

Graph shows how piezoelectric sensors perform during long-term dynamic pressure measurement of smallest pressure pulsations.

Sensores piezoeléctricos vs extensométricos

This animation illustrates what are the differences in mechanisms of piezoelectric sensors compared to strain gauge sensors.

Servoprensa

Servo presses in operation: thanks to their high energy efficiency, these electromechanical joining systems help to protect the climate.

T

Tecnología de medición diferencial

A measuring chain as an example of differential measurement technology: the signal to be transmitted is precise and distortion-free.

Tecnología de medición óptica

As a global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration, we support our customers in industry and science to improve their products and make their manufacturing processes more efficient.

Transductor de fuerza de ruedas

Custom-made wheel force transducers for performing load measurements to support vehicle development.

Transductor de par de ruedas

Application of wheel torque transducers during an air drag measurement on a heavy truck equipped with measurement technology.

W

WIM

Weigh In Motion (WIM) System: Quartz sensor installed on the level of the pavement surface