홈/제품/센서/가속도계/IEPE triaxial accelerometers, center through-hole, ceramic shear, 50 … 2000 g/8764B2K0AT00

IEPE triaxial center through-hole accelerometer, 2000 g, M4.5, 4-pin connector, with TEDS / 8764B2K0AT00

IEPE triaxial center through-hole accelerometer, 2000 g, M4.5, 4-pin connector, with TEDS
8764B2K0AT00
18032548
  • Ceramic shear triaxial accelerometer with IEPE output
  • Acceleration range: ±2000 g
  • M4.5, 4-pin connector
  • TEDS included
요청 시
요청 시
Measuring ranges
Maximum measuring range [g]
Maximum acceleration value you want to measure.
2000 g
Product type
Device Type
Accelerometer
Number of Axes
3
Technology
Ceramic, Shear
Mini
Yes
Metrological characteristics
Threshold (acceleration)
Minimum change in the measurand that produces a measurable change in the sensor output, while the change of the measurand takes place slowly and monotonically.
0.0045 g RMS
Electrical properties
TEDS
Yes
Output signal type
Voltage (Piezoelectric, IEPE)
Electrical isolation
Ground isolation
Ground Insulation
Yes
Influence quantities
Sensitivity for Voltage and IEPE Output
2.5 mV/g
Temperature coefficient of sensitivity (%/°C)
0.08
Dynamical properties
Minimum frequency (±5%) [Hz]
1 Hz
Maximum frequency (±5%) [Hz]
10000 Hz
Operation and installation
Minimal operating temperature [°C]
Minimal static operating temperature.
-54 °C
Maximum operating temperature [°C]
Maximum static operating temperature.
100 °C
Mounting Center Through Hole
Yes
Mounting Adhesive
Yes
Mounting type
Threaded hole / Stud, Adhesive / Wax
Sealing
Hermetic Seal
Applications
NVH testing
Interfaces
Connector Type
Side, M4.5 4-Pin Pos.
Accelerometer with a 2000 g range, M4.5 connector, and TEDS.
로딩 중
로딩 중