Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 2 m / 1641B2

1641B2
18000554
- Length: 2 m
- Temperature range: –55 to +200°C
- Sensor connection: KIAG 10-32 pos. 90° (IP65)
- Amplifier connector: BNC pos. (IP40)
ConnectionsKIAG 10-32 pos., 90°, BNC pos.Smallest possible bending radius5 mmDegree of protection EN 60529IP65, IP40
Predefined cable length2 mTemperature range-55 … 200 °C
Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. connector. Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1013 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.
Scheda tecnica
Inglese
pdf
Tedesco
pdf