Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos. / 1641B

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

1641B

Green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. connector
 
  • Number of conductors: 1
  • Length: 0.5 m / 1 m / 2 m / 5 m / custom made (0.1 to 50 m)
  • Temperature range: –55 to +200°C
  • Sensor connection: KIAG 10-32 pos. 90°
  • Amplifier connector: BNC pos.
Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1013 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.