Cavity pressure sensors, direct measuring (ø6 mm, 200 bar) / 6172B

Cavity pressure sensors, direct measuring (ø6 mm, 200 bar)

6172B

These piezoelectric cavity pressure sensors feature HighSens and Unisens® (unified sensitivity) technology.
 
  • Pressure range: 0 … 200 bar
  • Exchangeable single-wire or coaxial cable
  • Sensor front can be machined to adapt to the cavity wall
  • HighSens quartz sensor
The Type 6172B cavity pressure sensors consist of a HighSens quartz sensor for mold cavity pressure (Type 6177B) with exchangeable cable, fitted in a rugged adapter. Type 6172B, with 4 mm front diameter, comes flush with the adapter front with an annular gap of <10 µm and measures the pressure directly. The pressure acts over the entire front of the sensor and is transmitted to the quartz measuring element, which produces a proportional electric charge (pC = Picocoulomb). This is converted into a voltage output (0 ... 10 V) from a standard charge amplifier. All parts of the sensor are corrosion resistant. The exchangeable cable is screwed to the sensor with a tight seal. The connector is self-locking and splash-proof. For multi-cavity applications, sensors of Type 6172B without the single-wire connector Type 1839 should be used. For 4-channel applications, Type 6172B is used with a Type 1722A4 multi-channel connector, and for 8-channel applications with Type 1722A8. This sensor is available with several types of connecting cables.
6172B      
 
Cavity pressure sensor, direct measuring (ø6 mm, 200 bar)
Data sheet
English
pdf
 
German
pdf
 
Quick start guide
Quick Start Installation 6 mm Werkzeuginnendrucksensor
German
pdf
 
Quick Start Installation 6 mm Cavity Pressure Sensor
English
pdf