Página inicial/Produtos/Sensores/Sensores de força/Dinamômetros multicomponentes, forças máximas até 30 kN, placa de cobertura 140x190 mm/9139AA

Dinamômetro multicomponente MaxiDyn, 30 kN, placa de cobertura 140x190 mm / 9139AA

Dinamômetro multicomponente MaxiDyn, 30 kN, placa de cobertura 140x190 mm
9139AA
18030434
  • Dinamômetro piezoelétrico multicomponente com forças máximas Fx, Fy, Fz ±30 kN
  • Placa de cobertura 140x190 mm
  • Frequência natural fn (x), fn (y) 2,9 kHz, fn (z) 3 kHz
  • Conector de flange Fischer de 9 alfinetes
A pedido
A pedido
Measuring ranges
Minimum measuring range [kN]
-30 kN
Maximum measuring range [kN]
30 kN
Calibrations
Calibrated range Fx [kN]
0 … 30 kN
Calibrated range Fy [kN]
0 … 30 kN
Calibrated range Fz [kN]
0 … 30 kN
Product type
Force sensor type
A dynamometer is a force plate measuring forces and moments.
Multicomponent dynamometer
Preloaded sensor
Preloaded sensors are already calibrated and therefore ready-to-use. Non-preloaded sensors are smaller.
No
Crosstalk
Maximum crosstalk Fx→Fy
-2 … 2 %
Maximum crosstalk Fx→Fz
-2 … 2 %
Maximum crosstalk Fy→Fx
-2 … 2 %
Maximum crosstalk Fy→Fz
-2 … 2 %
Maximum crosstalk Fz→Fx
-2 … 2 %
Maximum crosstalk Fz→Fy
-2 … 2 %
Metrological characteristics
Linearity
Linearity represents the maximum deviation/error between ideal and actual output signal characteristics in relation to the measurand in a specific measuring range. It is expressed in percentage of the range of measurement signal (Full Scale Output).
≤±0.5 %FSO
Threshold
<0.01 N
Electrical properties
Output signal type
Charge (Piezoelectric, PE)
Minimal insulation resistance
10^13 Ω
Influence quantities
Sensitivity
Fx: -8.2 pC/N, Fy: -4.2 pC/N, Fz: -8.2 pC/N
Certificates and Standards
Degree of protection EN 60529
IP67
Operation and installation
Operating temperature range
-20 … 70 °C
Applications
Cutting processes and machining development, 3C electronics manufacturing
Cable properties
Cable included
No cable included
Interfaces
Connector type
Fischer 104 9-pole neg.
Dimensions and materials
Weight
12.9 kg
Trata-se de um dinamômetro multicomponente para a medição dos três componentes ortogonais de uma força. O design rígido e robusto, bem como a grande faixa de medição, permite a medição de grandes forças, por exemplo, em aplicações de corte de alto desempenho.
A carregar
A carregar