Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos. / 1641B
Green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. connector
- Number of conductors: 1
- Length: 0.5 m / 1 m / 2 m / 5 m / custom made (0.1 to 50 m)
- Temperature range: –55 to +200°C
- Sensor connection: KIAG 10-32 pos. 90°
- Amplifier connector: BNC pos.
Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1013 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.