Piezoelectric load cell, force transducer (Fz ±24 kN / ±5.4 klbf) / 9331C

Piezoelectric load cell, force transducer (Fz ±24 kN / ±5.4 klbf)

9331C

:18037812

Piezoelectric force transducer with a measuring range of Fz: -24 … 24 kN (±5.4 klbf)
Dimensions D x H: 29 x 52 mm
Female screw thread: M12x1.75
Connector: KIAG 10-32 neg.

Preloaded sensorYesMeasuring range-24 … 24 kNMaximum measuring range24 kNForce sensor typeSingle axis force sensorCalibrated range 10 … 24 kNCalibrated range 20 … 0.24 kNCalibrated range 30 … -24 kNMaximum force±26.4 kNNominal force±24 kNMaximum bending moment (Fz=0)104 NmTemperature sensitivity, sensitivity change (-40°C … 120°C, Tref = 25°C)±1.5 %Natural frequency (free-free) f0fz36.9 kHzAxial stiffness1150 kN/μmBending stiffness0.865 kNm/°Shear stiffness0.13 kN/μmTorsional stiffness0.633 kNm/°Sensor capacitance52±5 pFGround insulation resistance≥100 MΩInsulation resistance≥10^13 ΩSensitivity–3.9±0.3 pC/NOperating temperature range-40 … 120 °CLinearity±0.5 %FSOOutput signal typeCharge (Piezoelectric, PE)Weight170 gApplicationsIn- and End-of-Line Testing for Production processes

A piezoelectric load cell, also known as force transducer or force link, measures dynamic or quasistatic forces, both tensile and compression. This load cells contains a piezoelectric ring force transducer of the 90x1C sensor family which is preloaded and calibrated, thus ready to use immediately. Sensors in the 93x1C load cell family are the easiest way to measure forces piezoelectrically without the need for sophisticated installation and calibration. These force transducers are factory calibrated and preloaded to measure both tension and compression forces. The load cell is ready to measure within minutes and provide accurate data from dynamic or quasistatic processes. In addition, these force transducers have been installed in an electrically isolated manner, so that ground loops are largely eliminated.

Manuale

Piezoelectric Load Cells

Inglese

pdf

Piezo Kraftaufnehmer

Tedesco

pdf

Scheda tecnica

Piezoelectric Load Cells - for measuring dynamic and quasistatic tensile and compression forces

Inglese

pdf

フォースリンク動的および準静的な引張り力と圧縮力を測定

Giapponese

pdf

Piezo Kraftaufnehmer - für das Messen dynamischer und quasistatischer Zug- und Druckkräfte

Tedesco

pdf

High-insulating connecting cables, KIAG 10-32 pos. - BNC pos., PFA green

High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 0.5 m

High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 1 m

High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green

1633CSP

High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, customer-specific length

High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, 5 m

Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cable for piezoelectric sensors, highly flexible, M4x0.35 pos. - KIAG 10-32 pos., 10 m

Connecting cable for piezoelectric sensors, highly flexible, M4x0.35 pos. - KIAG 10-32 pos., 5 m

Force distributing caps for piezoelectrical load cells of Types 9313AAX and 93X1C

Force distributing cap for piezoelectrical load cell of Type 9331C

Flanges for optimum force introduction, for piezoelectric load cells Type 93x1C

Flange for optimum force introduction, for piezoelectric load cell Type 9331C

Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.

1900A21A12SP

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - BNC pos., length 0.3 to 20 m

1900A21A11SP

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.3 to 20 m

Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)

Miniature industrial charge amplifier with IO-Link (mICA), ±100000 pC

Miniature industrial charge amplifier with IO-Link (mICA), ±500000 pC

Industrial miniature charge amplifiers MiniAmp, ±10 V

Industrial miniature charge amplifier MiniAmp, low range, ±1000 pC

Industrial miniature charge amplifier MiniAmp, medium range, ±10000 pC

Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

5080A

Laboratory charge amplifier, multi-channel, low noise, measuring ranges from ±2 to ±2200000 pC

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 3 m

1635CSP

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.1 to 50 m

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos.

1939ASP

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., length 0.1 to 20 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., 3 m

Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., voltage output ±10 V

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., current output 4 … 20 mA

Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, rack module version, 230 V

Laboratory charge amplifier, 1-channel, rack module version, 115 V

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

1641BSP

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., length 0.1 to 50 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 5 m

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., 0.5 m

1941ASP

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., length 0.1 to 50 m

Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC

Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC, Piezotron (IEPE) input

Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet

Digital industrial charge amplifier (dICA), 1-channel, EtherCat

Digital industrial charge amplifier (dICA), 1-channel, Ethernet/IP