Laboratory charge amplifiers LabAmp with data acquisition, 4 or 8 channels / 5167A

Laboratory charge amplifiers LabAmp with data acquisition, 4 or 8 channels

5167A

This versatile charge amplifier with integrated data acquisition (option) is suitable for piezoelectric sensors and piezoelectric dynamometers.
 
  • Measuring ranges from 100 to 100000 pC, frequency range: ≈0 … 45 kHz
  • Integrated, optional 24-bit data acquisition with up to 100 kSps per channel
  • Fully flexible low-pass, high-pass, and notch filter adjustment
  • 4 or 8 analog outputs with fully flexible 2-point scaling and internal routing
  • Two Ethernet interfaces with included switch functionality
  • PTP synchronization for data acquisition with multiple devices
  • Digital inputs for Reset/Measure and Trigger
The Kistler LabAmp Type 5167A is not only an outstanding low-noise charge amplifier for dynamic signals, but optionally also a powerful data acquisition device delivering the digitized measurement values directly to a host computer for further analysis. It is configured and operated in a web-interface, conveniently accessible by a standard web browser, or via KiStudio Lab Software Package Type 2910A (including post-processing software jBEAM). Thanks to advanced signal processing technology, the Kistler LabAmp Type 5167A offers impressive flexibility. The frequencies of the high-pass, low-pass, and notch filters can be directly entered as numeric values in Hertz. The input signals can be flexibly routed to the analog outputs. The graphical user interface not only offers a simple and intuitive way to configure the device, but also displays different measurement values (e.g., live value, peak value, root mean square). The virtual channel functionality allows for real-time summation of different input signals. Furthermore, the optional browser-based data download allows for the acquired data to be processed in an analysis software. For more advanced tasks or direct analysis, the amplifier can be integrated directly into LabVIEW thanks to the provided Virtual Instruments driver.
Applicazione software
LabAmp_LabVIEW_Driver_V3_3 (LabVIEW programming skills required)
Inglese
zip
 
Network Setup Wizard (V 3.1.0)
Inglese
zip
 
DynoWare Software (3.2.5.0_Win 7_8_10_Incl. LabAmp)
Inglese
bin
 
5165A_5167A_DemoProg_3.2
Inglese
bin
 
Firmware
5167A_Device_SW_1_3_1_incl_manual
Inglese
zip
 
Guida rapida
Charge Amplifier and Data Acquisition Device
language-independent
pdf
 
Manuale
DynoWare Type 2825A…
Inglese
pdf
 
DynoWare Typ 2825A…
Tedesco
pdf
 
LabAmp Network Configuration Guide
Inglese
pdf
 
Scheda tecnica
Giapponese
pdf
 
Inglese
pdf
 
Inglese
pdf
 
Giapponese
pdf
 
Cinese
pdf