Torque measuring flange system KiTorq Rotor, measuring ranges from 100 to 10000 Nm / 4550A

Torque measuring flange system KiTorq Rotor, measuring ranges from 100 to 10000 Nm
4550A
18013845
  • Analog and digital interfaces for maximum flexibility and easy integration
  • Well suited for static and dynamic measurements with a cut-off frequency (–3 dB) 10 kHz
  • Very high accuracy thanks to linearity error including hysteresis of only 0.03 %
  • Rotational speed or angle measurement with up to 8192 pulses per revolution
Upon request
On request
Measuring ranges
Maximum measuring range [N·m]
10000 N·m
Measuring range [N·m]
100 … 10000 N·m
Product type
Stator
0.7 kg
Rotating / Non-rotating
Rotating
Mechanical properties
Limiting Torque
200 %
Maximum stroke at limit longitudinal force
0.04 mm
Metrological characteristics
Linearity including hysteresis
Linearity represents the maximum deviation/error between ideal and actual output signal characteristics in relation to the measurand in a specific measuring range. It is expressed in percentage of the range of measurement signal (Full Scale Output).
0.03 %FSO
Relative standard deviation of repeatability
0.03 %FSO
Dual-range
Yes
Accuracy class strain gauge
0.05
Electrical properties
Output signal type
Voltage, Frequency, Digital
Influence quantities
Temperature influence zero point
0.05 %FSO/10K
Temperature influence nominal value
0.05 %FSO/10K
Additional maximum runout error at transverse load limit FQ
0.02 mm
Dynamical properties
Maximum speed [rpm]
Select the category in which the torque to be measured falls.
20000 rpm
Group delay
<220 µs
Certificates and Standards
Degree of protection EN 60529
IP54
Operation and installation
Operating temperature range
10 … 60 °C
Sensor design
Flange type
Applications
In- and end-of-line testing for production processes, eVTOL / UAV / drone testing, Rocket and jet engine testing, 3C electronics manufacturing
Interfaces
Angle / speed output
8192 pulses/revolution
Additional properties
Maximum allowed axial misalignment between rotor and stator
±1 mm
Maximum allowed air gap between rotor and stator Sr
1±0.5 mm
CAD
CAD Data for Torque measuring flange system KiTorq Rotor of Type 4550A
language-independent
zip
Please click here to log in to myKistler and you will be redirected.
Data sheet
English
pdf
Please click here to log in to myKistler and you will be redirected.
English
pdf
Please click here to log in to myKistler and you will be redirected.
Manual
KiTorq Torque Measuring Flange
English
pdf
Please click here to log in to myKistler and you will be redirected.
Product brochure
English
pdf
Please click here to log in to myKistler and you will be redirected.
Success story
English
pdf
Please click here to log in to myKistler and you will be redirected.
17 results
Accessory Type