Piezoelectric Press Force load cell, press force transducer, Fz max 0 … 700 kN / 9393A

9393A
18007740
- Preloaded and calibrated press force transducer, ready to measure immediately
- Calibrated ranges Fz: 0 … 7 kN, 0 … 70 kN, 0 … 700 kN
- Sensitivity: ≈ –1,9 pC/N
- Dimensions DxH: 145x190 mm
Preloaded sensorYesMeasuring range0 … 700 kNMaximum measuring range700 kNForce sensor typeSingle axis force sensorCalibrated measuring range0 … 700 kN (Fz 100%)Natural frequency fn(Fz)>11.3 kHzSensitivity–1.9 pC/NOperating temperature range-40 … 120 °COutput signal typeCharge (Piezoelectric, PE)Degree of protection EN 60529IP68, IP65Weight18663 gApplicationsIn- and End-of-Line Testing for Production processes
This force transducer of the Press Force series is ideal for measuring both dynamic and quasistatic forces. The factory preloading and adaptability of these practical designs ensure readiness for immediate use. The Press Force load cell is based on the piezoelectric measuring principle. The force acting on the quartz element generates at the output of the sensor a proportional electric charge, which is converted by the series-connected measuring amplifier into a process signal suitable for evaluation (typically 0 ... 10 V). Depending on the type of sensor, tension forces of up to 16 % of the compression force range can also be measured. Although uncalibrated, these ranges is often used for detecting tool withdrawal forces, for example after press-fit processes.
Data sheet
German
pdf
English
pdf
Japanese
pdf
Chinese
pdf
Manual
Press Force Sensor
English
pdf
Press Force Sensor
German
pdf