High quality preloading set for piezoelectric force sensors of Types 9041C and 9104C / 9420A41

High quality preloading set for piezoelectric force sensors of Types 9041C and 9104C
9420A41
18007784
  • Pretensioning element set for force sensors 9041C and 9104C
  • Bolt thread M12x1.0, length: 60 mm
  • Max. preloading force: 60 kN
  • Shunt: approx. 8%
On request
On request
Inner Ø sensor17 mmPretension bolt threadM12x1
Pretension bolt, L, length60 mm

These standardized pretensioning elements are used for mounting piezoelectric ring force transducers of Type 9041C and Type 9104C. A set of pretensioning elements consists of a pretensioning bolt (PB, high strength, stainless steel of the mold), a centering sleeve (CS), two insulating washers (IW) and a hexagon nut (HN). These accessories are also separately available on request. It is recommended to preload piezo force sensors with at least 20% of their nominal force to increase the accuracy. In addition, the expected tensile and lateral forces have a decisive influence on the specification of the pretension force. Details can be found in the data sheet and the manual of the corresponding sensor.

Data sheet
English
pdf
For access, please click here to log in. You will be redirected automatically.
0 results
Accessory Type