High quality preloading set for piezoelectric force sensors of Types 9021C and 9102C / 9420A21

High quality preloading set for piezoelectric force sensors of Types 9021C and 9102C
9420A21
18007782
  • Pretensioning element set for force sensors 9021C and 9102C
  • Bolt thread M8x1.0, length: 40 mm
  • Max. preloading force: 25 kN
  • Shunt: approx. 8%
On request
On request
Inner Ø sensor10.5 mmPretension bolt threadM8x1
Pretension bolt, L, length40 mm

These standardized pretensioning elements are used for mounting piezoelectric ring force transducers of Type 9021C and Type 9102C. A set of pretensioning elements consists of a pretensioning bolt (PB, high strength, stainless steel of the mold), a centering sleeve (CS), two insulating washers (IW) and a hexagon nut (HN). These accessories are also separately available on request. It is recommended to preload piezo force sensors with at least 20% of their nominal force to increase the accuracy. In addition, the expected tensile and lateral forces have a decisive influence on the specification of the pretension force. Details can be found in the data sheet and the manual of the corresponding sensor.

Data sheet
English
pdf
For access, please click here to log in. You will be redirected automatically.
0 results
Accessory Type