Home/Products/Connectivity and accessories/Cables/Extensions for high insulating cables, KIAG 10-32 pos. to KIAG 10-32 pos./1635CSP

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.1 to 50 m / 1635CSP

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.1 to 50 m
1635CSP
18000545
  • Length: custom (0.1 to 50 m)
  • Temperature range: –55 ... +200°C
  • Connection: KIAG 10-32 pos. – KIAG 10-32 pos. (IP65)
Upon request
On request
Configure
Certificates and Standards
Degree of protection EN 60529 (sensor)
IP65
Cable properties
Configurable cable length
0.1 … 50 m
Interfaces
Connection type (sensor)
KIAG 10-32 pos.
Connection type (amplifier)
KIAG 10-32 pos.

Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. connector. Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1E13 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.

Loading
Loading