Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., 2 m / 1939A2
- Length: 2 m
- Temperature range: –55 to +200°C
- Sensor connection: KIAG 10-32 pos. int (IP65)
- Amplifier connector: BNC pos. (IP40)
ConnectionsKIAG 10-32 pos. int., BNC pos.Smallest possible bending radius5 mmDegree of protection EN 60529IP65, IP40
Predefined cable length2 mTemperature range-55 … 200 °C
Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. int. connector. Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1013 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.