Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., 0.5 m / 1941A0,5

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., 0.5 m
1941A0,5
18026139
  • Length: 0.5 m
  • Temperature range: –55 to +200°C
  • Sensor connection: KIAG 10-32 pos. int (IP65)
  • Amplifier connector: TNC pos. (IP65)
Upon request
On request
Mechanical properties
Bending radius [mm]
5 mm
Certificates and Standards
Degree of protection EN 60529
IP65, IP40
Operation and installation
Temperature range
-55 … 200 °C
Interfaces
Connection type (sensor)
KIAG 10-32 pos.
Connection type (amplifier)
TNC pos.
Dimensions and materials
Predefined cable length
0.5 m
Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. int. connector Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1013 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.
Loading
Loading