Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., 3 m / 1939A3

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., 3 m
1939A3
18000903
  • Length: 3 m
  • Temperature range: –55 to +200°C
  • Sensor connection: KIAG 10-32 pos. int (IP65)
  • Amplifier connector: BNC pos. (IP40)
On request
On request
ConnectionsKIAG 10-32 pos. int., BNC pos.Degree of protection EN 60529IP65, IP40Temperature range-55 … 200 °C
Predefined cable length3 mSmallest possible bending radius5 mm
Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. int. connector. Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1013 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.
Data sheet
English
pdf
For access, please click here to log in. You will be redirected automatically.
0 results
Accessory Type