Home/Products/Connectivity and accessories/Cables/Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos./1635C3

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 3 m / 1635C3

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 3 m
1635C3
18010503
  • Length: 3 m
  • Temperature range: –55 ... +200°C
  • Connection: KIAG 10-32 pos. – KIAG 10-32 pos. (IP65)
On request
On request
ConnectionsKIAG 10-32 pos., KIAG 10-32 pos.Degree of protection EN 60529IP65
Predefined cable length3 m

Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. connector. Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1E13 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.

0 results
Accessory Type