Piezoelectric force sensors, ring force transducers, maximum forces Fz 20 kN to 700 kN / 910xC

Piezoelectric force sensors, ring force transducers, maximum forces Fz 20 kN to 700 kN

910xC

Piezoelectric force sensors, also known as piezoelectric ring force transducers, for precise measurement of tensile and compressive forces in highest resolution.
 
  • Thoroughly tested ring force transducers, delivered without calibration certificate
  • Linearity including hysteresis ≤±1.5%
  • Extremely high stiffness thanks to very compact force sensor design
  • Extremely low threshold
  • Operating temperature range: –40 ... 120°C
  • Degree of protection: IP68 (dependent on cable)
  • No aging, unlimited service life
The 910x family is a piezoelectric (PE) sensor series for force measurement in the z-direction. These ring force transducers contain a quartz sensor element which measures the force directly transferred to the quartz element located within the sensor. When subjected to a mechanical load, quartz produces an electric charge that is proportional to that load. An outstanding property of quartz is the very low threshold, resulting in a high sensor sensitivity which is extremely linear over the entire measuring range. Thus the behaviour in a certain measuring range is practically identical for all PE sensors, independent of their size. The force sensors are thoroughly tested, but are delivered without calibration certificate and must be calibrated on site after installation.
Data sheet
English
pdf
 
German
pdf
 
Japanese
pdf
 
Manual
Piezoelectric Force Sensors, Ring Force Transducers
English
pdf
 
圧電式力センサ、 産業用力センサ、 薄型力センサ
Japanese
pdf
 
Piezo Kraftsensor, Kraftmessring
German
pdf