Cavity pressure sensors, direct measuring (ø4 mm, 200 bar) / 6177B

Cavity pressure sensors, direct measuring (ø4 mm, 200 bar)

6177B

These piezoelectric cavity pressure sensors feature HighSens and Unisens® (unified sensitivity) technology.
 
  • Pressure range: 0 … 200 bar
  • Exchangeable single-wire or coaxial cable
  • Sensor front can be machined to adapt to the cavity wall
  • HighSens quartz sensor
The HighSens quartz sensor for mold cavity pressure (Type 6177B) has a front diameter of 4 mm. An O-ring seals the annular gap of <10 µm between sensor and mounting bore and thereby also center-aligns the sensor in the bore. The pressure acts over the entire front of the sensor and is transmitted to the quartz measuring element, which produces a proportional electric charge (pC = Picocoulomb). This is converted into a voltage output (0 ... 10 V) from a standard charge amplifier. All parts of the sensor are corrosion resistant. The exchangeable cable is screwed to the sensor with a tight seal. The connector is self-locking and splash-proof. For multi-cavity applications, the Type 6177B sensor is used without the single-wire connector Type 1839. For 4-channel applications, Type 6177B is mounted with the Type 1722A4 multi-channel connector and for 8-channel applications, with the Type 1722A8 multi-channel connector. This sensor is available with several types of connecting cables.
6177B      
 
Cavity pressure sensor, direct measuring (ø4 mm, 200 bar)
Data sheet
Japanese
pdf
 
English
pdf
 
German
pdf
 
Manual
Sensor de Presión en Cavidad de 4 mm con frente mecanizable para coincidir con el perfil de la cavidad
Spanish
pdf
 
Capteur de pression empreinte 4 mm avec face avant usinable en fonction du profil de l’empreinte
French
pdf
 
Quick start guide
Quick Start Installation 4 mm Werkzeuginnendruck-Sensor
German
pdf
 
Quick Start Installation 4 mm Cavity Pressure Sensor
English
pdf