Welding force measuring case incl. 5825A2 (for welding force calibration transmitter 9831C) / 9831C0001

Welding force measuring case incl. 5825A2 (for welding force calibration transmitter 9831C)
9831C0001
18008203
  • Practical transport case incl. 5825A2 Remote Control Monitor
  • 9831C measuring device to be ordered separately
  • Includes: 1.5m connecting cable, Offset screw driver, countersunk screws, and calibration certificates
Upon request
On request
Measuring ranges
Minimum measuring range [kN]
0 kN
Maximum measuring range [kN]
5 kN
Product type
Force sensor type
A dynamometer is a force plate measuring forces and moments.
Single axis force sensor
Preloaded sensor
Preloaded sensors are already calibrated and therefore ready-to-use. Non-preloaded sensors are smaller.
Yes
Electrical properties
Output signal type
Voltage
Certificates and Standards
Degree of protection EN 60529
IP65
Operation and installation
Applications
Spot welding process monitoring
Cable properties
Cable included
Yes - fixed cable

The welding force measuring case Type 9831C0001 provides together with a calibration transmitter of Type 9831C a complete calibration system, which is primarily intended for mobile data acquisition of electrode closing forces using the welding and fastening monitor Type 5825A2.

Data sheet
English
pdf
Please click here to log in to myKistler and you will be redirected.
Manual
Welding Force Calibration Transmitter
English
pdf
Please click here to log in to myKistler and you will be redirected.
0 results
Accessory Type