Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., length 0.1 to 50 m / 1941ASP

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., length 0.1 to 50 m
1941ASP
18000908
  • Length: custom (0.1 to 50 m)
  • Temperature range: –55 to +200°C
  • Sensor connection: KIAG 10-32 pos. int (IP65)
  • Amplifier connector: TNC pos. (IP65)
Upon request
On request
Certificates and Standards
Degree of protection EN 60529
IP65
Cable properties
Configurable cable length
0.1 … 50 m
Interfaces
Connector type
10-32 UNF (positive), TNC (positive)
Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. int. connector Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1013 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.
Data sheet
English
pdf
Please click here to log in to myKistler and you will be redirected.
0 results
Accessory Type