Handheld Piezotron (IEPE) couplers, 1-channel / 5114

This portable 1-channel handheld Piezotron (IEPE) coupler is powered by built-in battery and is suitable for the operation of Piezotron (IEPE) sensors.

5114

This portable 1-channel handheld Piezotron (IEPE) coupler is powered by built-in battery and is suitable for the operation of Piezotron (IEPE) sensors.
Main features / advantages
  • Powered by built-in battery, AC power supply, or any DC voltage source
  • Sensor bias voltage display
  • Sensor and cable circuit integrity indication via LEDs (ok, short circuit, interruption)
The Type 5114 is a single-channel Piezotron (IEPE) coupler that provides constant current excitation required by low-impedance voltage mode sensors with built-in electronics (IEPE sensors). Sensor power is supplied by the same two-wire cable that provides the low impedance output signal. The Type 5114 decouples the DC bias voltage from the output signal. A 3.5 digit LCD indicates the sensor DC bias voltage. Three LEDs on the front panel indicate the basic status of the sensor circuit (ok, short circuit, interruption). The device operates from a single 9 volt battery or DC power from an external AC-DC power adapter. It can also be powered by external 12 volt DC power supplied through the 2.1 mm jack. A power switch is located on the front case.
Data sheet
English
pdf
Please click here to log in to myKistler and you will be redirected.
English
pdf
Please click here to log in to myKistler and you will be redirected.
Manual
Power Supply/Coupler
English
pdf
Please click here to log in to myKistler and you will be redirected.