Kistler supplies engineers in vehicle dynamics with a complete sensor portfolio to capture relevant parameters.

Vehicle dynamics testing

Product portfolio for accurate and efficient vehicle dynamics testing

Intensive vehicle dynamics tests play an essential part in vehicle research and development. Whether the focus is on sports performance or comfort, tuning of the chassis, drivetrain and control systems is a decisive factor in achieving the desired characteristics for the vehicle. In this way, automobile manufacturers can exploit unrivaled opportunities to stand out radically from their competitors.

Every development must always go hand in hand with vehicle safety. The ISO standard tests and validations are fundamental evaluations that are required for developing a unique driving experience that also offers a feeling of safety while driving – for passenger vehicles on normal roads as well as racing cars in motorsport and autonomous driving.

Control systems such as ABS and ESC must be correctly tuned to ensure the desired driving behavior and feel. A precise characterization of longitudinal and transverse vehicle dynamics can only be achieved based on measurements of the sideslip and drift angles. Especially in motorsport, measurements of these motion parameters for vehicle dynamics can be the key to critical competitive edge.

Pole position guaranteed! Thanks to our accurate and efficient sensor portfolio for vehicle dynamics, you can:

Thanks to the Correvit S-Motion sensor from Kistler, Emil Frey Racing improves the vehicle dynamics of its Lamborghinis.

Optimize vehicle driving behavior to enhance performance, comfort and safety

Chassis development and refinement
Tuning the drivetrain and control systems
Optimization of control algorithms for autonomous driving and ADAS

Optimize driving behavior in motorsport

Wheel slip and sideslip angle measurement for cornering and tire grip optimization
Racing strategy optimization

…and much more:

Performance of ISO standard tests
Safety systems development and validation
Tire research, development and selection
Vehicle homologation and compliance

We assist you with complete modular measurement technology solutions, and our experienced experts offer you on-site support with vehicle tests – so you achieve optimal vehicle dynamics design.

Benefit from the advantages:

Optical sensors from Kistler for measuring longitudinal and traverse dynamics are recommended for vehicle dynamics testing.

Complete measurement technology portfolio to capture all key parameters during maneuvers such as steady-state circular driving behavior tests and brake testing

Reliable, high-precision measurement data as the basis for successful design
Simple setup
Suitable for harsh test conditions
Configuration and measurement software included
Compatible with data acquisition systems from various manufacturers

With optical sensors from Kistler such as the S-Motion DTI, you can rely on

Direct frictionless and slip-free measurements of longitudinal and transverse speed
Patented, tried-and-tested Correvit technology
Low-noise signals thanks to sensor fusion technology
Flexible conversion of measurands for any desired reference points in the vehicle
Fast, faster, S-Motion: minimal signal delay

The reliable way to determine a vehicle's self-steering behavior

Kistler offers high-precision measuring steering wheels (MSW) for vehicle dynamics testing.

You want to

Design your vehicle's ride stability and measure the related vehicle motion characteristics
Tune the chassis so that understeer and/or oversteer match your target characteristics

Method

Equip the vehicle with measurement technology such as the Correvit S-Motion optical sensor to capture the motion parameters for vehicle dynamics
Measure the steering angle and transverse dynamics (lateral acceleration) to evaluate the vehicle's behavior during steady-state circular driving as per ISO 4138
Measure the sideslip angle, yaw rate, longitudinal speed, steering torque and roll angle in advanced driving behavior tests according to standards such as ISO 4138 and GB/T 6323.6

The reliable way to evaluate brake systems

Optical sensors from Kistler (e.g. Correvit L-Motion) to evaluate brake systems help achieve best vehicle dynamics design.

You want to

Provide proof that the brake system is optimally designed to achieve the shortest possible braking distances with maximum driving comfort (response behavior, actuating force, etc.)

Method

Brake path measurement with straight-line ABS braking test to DIN 70028
Measure the braking distance for straight-line ABS braking by performing the braking test as per ISO 21994:
Evaluate the braking deceleration
Evaluate the braking distance
Evaluate the vehicle's ride stability