Accueil/Produits/Capteurs/Accéléromètres/Accéléromètres K-Shear à usage général, 25 ... 5000 g, connecteur supérieur/8704B50M1

Accéléromètre à usage général K-Shear, 50 g, isolé de la terre / 8704B50M1

The Kistler accelerometer with top connector is suitable for structural vibration measurements during NVH testing.
8704B50M1
18007041
  • Accéléromètre avec sortie IEPE, usage général
  • Plage d'accélération : ±50 g
  • Isolation de la terre
Sur demande
Sur demande
Se connecter à myKistler pour voir les prix
Measuring ranges
Maximum measuring range [g]
Maximum acceleration value you want to measure.
50 g
Product type
Device Type
Accelerometer
Number of Axes
1
Technology
Quartz, Shear
Metrological characteristics
Threshold (acceleration)
Minimum change in the measurand that produces a measurable change in the sensor output, while the change of the measurand takes place slowly and monotonically.
0.004 g RMS
Electrical properties
Output signal type
Voltage (Piezoelectric, IEPE)
Electrical isolation
Ground isolation
Ground Insulation
Yes
Influence quantities
Sensitivity for Voltage and IEPE Output
100 mV/g
Temperature coefficient of sensitivity (%/°C)
-0.06
Dynamical properties
Minimum frequency (±5%) [Hz]
0.5 Hz
Maximum frequency (±5%) [Hz]
10000 Hz
Operation and installation
Minimal operating temperature [°C]
Minimal static operating temperature.
-54 °C
Maximum operating temperature [°C]
Maximum static operating temperature.
100 °C
Mounting Threaded Hole
Yes
Mounting Adhesive
Yes
Mounting Magnetic
Yes
Mounting type
Threaded hole / Stud, Adhesive / Wax, Magnetic base
Sealing
Hermetic Seal
General Purpose
Yes
Applications
NVH testing
Interfaces
Connector Type
Top, 10-32 negative
Accéléromètre avec une plage de 50 g et une isolation de la terre.
Chargement
Chargement