Products for the monitoring and control of injection molding
Reliable and accurate sensors built the basis for effective process monitoring in injection molding. Measuring where the process takes place is the key to transparently detect the process condition. That's why our philosophy is to record the decisive process variables of pressure and temperature directly in the injection molding tool. Possible deviations from the ideal state are shown immediately in the respective process curves and allow to reliably predict the quality of the molded part, shot by shot.
Cavity pressure sensors, indirect measuring (ø12.6 mm, 10 kN, 200°C)
9204B
9204B
Cavity pressure sensor, indirect measuring (ø12.6 mm, 10 kN, 200°C, coaxial cable length 0.1 to 5 m)
Cavity pressure sensors, indirect measuring (ø6 mm, 2.5 kN, 200°C)
9211B
9211B
Cavity pressure sensor, indirect measuring (ø6 mm, 2.5 kN, 200°C), coaxial cable (custom length from 0.1 m to 5 m)
Cavity pressure sensors, indirect measuring (ø6 mm, 2.5 kN, 200°C), with M2.5 mounting thread
9213B
9213B
Cavity pressure sensor, indirect measuring (ø6 mm, 2.5 kN, 200°C), with M2.5 mounting thread and coaxial cable (0.1 m to 5 m)
