/Products/Connectivity and accessories/Cables/Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos./1941A0,5

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., 0.5 m / 1941A0,5

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., 0.5 m
1941A0,5
18026139
  • Length: 0.5 m
  • Temperature range: –55 to +200°C
  • Sensor connection: KIAG 10-32 pos. int (IP65)
  • Amplifier connector: TNC pos. (IP65)
 
 
ConnectionsKIAG 10-32 pos. int., TNC pos.Smallest possible bending radius5 mmDegree of protection EN 60529IP65
Predefined cable length0.5 mTemperature range-55 … 200 °C
Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. int. connector Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1013 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.